Home


Items: 0
Total: $0.00
Shopcart Checkout
 

Home > Store > 30_degree > lee_30_degree

Rod Holder Inserts Lee's Vinyl Rubber Insert For RH510 & RH527V 3/23
LEE'S

Rod Holder Vinyl Rubber Insert for RH510 & RH527V
 These inserts protect your expensive rods, reduce rattle noise and wear and tear.
Fits Rod Holders
with an OD of 2 in.

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
The choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task.
 
 RH511


Price: $24.95

Click for larger image




Flush Mount Rod Holder Inserts Vinyl Rubber Insert For RH525 3/23
LEE'S
RH526

Vinyl Rubber Insert for RH525
 
 SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Since 1920 we have been striving to give you the saltwater sportsmen the highest quality, precision sport fishing equipment there is! Using the finest marine materials you can be sure Lee products will last year after year, saving you time and money while making sure that the “Big One” won’t get away! With our complete line of Outriggers and  Rod Holders one of our products will fit your needs.



Price: $24.95

Click for larger image




Flush Mount Rod Holder Inserts Vinyl Rubber Insert For RH529H 3/23
LEE'S
RH528

Vinyl Rubber Insert for RH529H
 
 SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Thank you for choosing Lee’s Tackle. Since 1920 we have been striving to give you the saltwater sportsmen the highest quality, precision sport fishing equipment there is! Using the finest marine materials you can be sure Lee products will last year after year, saving you time and money while making sure that the “Big One” won’t get away! With our complete line of Outriggers and Rod Holders one of our products will fit your needs.



Price: $24.95

Click for larger image




Flush Mount Rod Holder Insert Vinyl Rubber fits RH515, RH532 & Ch110 3/23
LEE'S
RH516

Vinyl Rubber Insert for RH515, RH532 & CH110
 
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
 
 
 Fits Rod Holders
with an OD of 2 1/4 in.

Since 1920 we have been striving to give you the saltwater sportsmen the highest quality, precision sport fishing equipment there is! Using the finest marine materials you can be sure Lee products will last year after year, saving you time and money while making sure that the “Big One” won’t get away! With our complete line of Outriggers and  Rod Holders  one of our products will fit your needs.



Price: $29.95

Click for larger image




Rod Holder Vinyl Rubber Insert for RH530 LEE'S 3/23
LEE'S
RH531

Vinyl Rubber Insert for RH530
 
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
 
Vinyl inserts protect your expensive rods from excessive wear and tear, they also reduce rattle noise



Price: $29.95

Click for larger image




Rod Holder Vinyl Rubber Insert For RH534H LEE'S 7/22
LEE'S

RH535

Vinyl Rubber Insert for RH534H
 
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Vinyl inserts protect your expensive rods from excessive wear and tear, they also reduce rattle noise



Price: $29.95

Click for larger image




Flush Mount Rod Holder Backing Plate Stainless Steel for Lee's 0° ,15° and 30° Medium Rod Holders 3/23
LEE'S
Stainless Steel Backing Plate
for zero (0) degree, 15° degree &  30° degree  Medium Rod Holders
 
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
 
The choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task.
 
RH5931



Price: $34.95

Image Not Available



Flush Mount Rod Holder Backing plate for 0°, 15° and 30° Heavy Rod Holders 3/23
LEE'S
Stainless Steel Backing Plate for zero (0) degree, 15° degree &  30° degree  Heavy Duty Rod Holders
 
 SHIPS FREE IN LOWER 48 STATES

The choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task.
 
RH5930



Price: $44.95

Click for larger image




Flush Mount Rod Holder 30° 3/23
LEE'S
LEES-Flush Mount Rod Holder 2.0." O.D.
 
SHIPS FREE IN LOWER 48 STATES

RH-525SS Medium 30° Stainless Steel

The choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electro-polished Lee’s has the rod holder to suit any task.
 
SKU:
31123
RH525SS
 


Price: $99.95

Click for larger image




Flush Mount Rod Holder 30° Stainless Steel Flush Mount Rod Holder - 2.25" O.D. Lee's 3/23
LEE'S
Flush Mount Rod Holder 2.25" O.D.
 
SHIPS FREE IN LOWER 48 STATES


Large 30° Stainless Steel


The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Since 1920 we have been striving to give you the saltwater sportsmen the highest quality, precision sport fishing equipment there is! Using the finest marine materials you can be sure Lee products will last year after year, saving you time and money while making sure that the “Big One” won’t get away! With our complete line of Outriggers and Rod Holders one of our products will fit your needs.
SKU:
31126
RH530SS


Price: $114.95

Image Not Available



Flush Mount Rod Holder 30° Stainless Steel Heavy Duty Bar Pin Rod Holder - 2" O.D Lee's 3/23
LEE'S
Flush Mount Rod Holder 2.0" O.D. 30 Degree
 
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

 
Heavy Duty Bar Pin
All Stainless Steel

  Medium 30°

The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Since 1920 we have been striving to give you the saltwater sportsmen the highest quality, precision sport fishing equipment there is! Using the finest marine materials you can be sure Lee products will last year after year, saving you time and money while making sure that the “Big One” won’t get away! With our complete line of Outriggers and Rod Holders one of our products will fit your needs.
SKU:
31129
RH525SS/XS


Price: $114.95

Image Not Available



Flush Mount Rod Holder 30 degree Stainless Steel Heavy Duty Bar Pin Rod Holder - 2.25" O.D. Lee's 3/23
LEE'S
LEES-Flush Mount Rod Holder 2.25" O.D.  30 Degree
 
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

 
Heavy Duty Bar Pin All Stainless Steel
 
The choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task.
SKU:
31132
RH-530SS/XS Large 30°
 


Price: $139.95

Click for larger image




Flush Mount Rod Holder - Medium Length 2.0" O.D Lee's 30° Stainless Steel Swivel Base 3/23
LEE'S
LEES 30 Degree  2.0." O.D.
 
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

Standard Angle 30° Short Tube

Medium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube.

Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.
Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder.
SKU:
31168
RH5165
 


Price: $159.95

Click for larger image




Flush Mount 30 Degree Stainless Steel Swivel Base Rod Holder 7/22
LEES
Swivel Base Flush Mount Rod Holder
 
SHIPS FREE IN LOWER 48 STATES
 
Medium 30 Stainless Steel

Without a doubt, our swivel base rod holder is the "Ultimate Rod Holder" for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.
 
Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tip's roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a half inch stainless steel lock nut at the bottom of the rod holder. When you buy a Lee Rod Holder your getting the best.
 

 Part #: RH-5365SS
 


Price: $159.95

Image Not Available



Flush Mount Rod Holder 30° Lee's Stainless Steel Swivel Base 2.25" O.D. 3/23
LEE'S

LEES-Swivel Base Rod Holders 30 Degree 2.25" O.D.
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

RH575
Standard Angle 30°
Stainless Steel Flush Mount w/ Swivel Base
Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.


Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder.
SKU:
31162
RH575
 


Price: $179.95

Click for larger image




Flush Mount Rod Holder 30° Lee's Stainless Steel Swivel Base Flush Mount Rod Holder 2.25" OD X 14.5" Tube 3/23
LEE'S
Swivel Base Rod Holders    30 Degree  2.25" O.D. LEES
 
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

RH575XL

Standard Angle 30°

Stainless Steel Flush Mount w/ Swivel Base Extra Long
This holder is 4" longer than the standard length allowing the bent butt to sit deeper in the holder thus reducing the leverage and stress on the mounting surface.
Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.
Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder.
 
 You can't go wrong when you choose Lee's fishing equipment.
SKU:
31163
RH575XL
 


Price: $199.95

Click for larger image





Categories:

0_(zero)_degree
15_degree
30_degree
cisco_fishing_systems
coolers_tuna_tubes
crabbing
downriggers
fishing_reels
fishing_ski_radar_arches
foul weather gear
gemlux_products
glp_fishing_systems
horizontal_clamp-on
life_rafts
marine_antennas_hdwe
marine_battery_chargers
marine_compass
marine_electronics
marine_radios
marine_radios_handheld
marine_solar_charging_systems
mate_series_rod_cup_holder
mini_drifter_boats
mooring_whips
muddcreek_tackle
night vision,radar
rod_holder_inserts_liners
rod_rigger
shallow water anchors
shore_power_systems
swimplatforms_and__ladders
t-tops
tackle_and_storage_centers
trailer_accessories
trolling
two_way_clamp_on
underwater_lighting
vertical_clamp_0n
wakeboards
windshied_wiper
flush_mount_rod_holders
clamp_on_rod_holders
bulkhead_rod_holders
adjustable_rod_holders_and_track_systems
rocket_launchers
outriggers
marine_hardware_and_accessories_&_bow_thrusters

Rodholderdepot.com
7900 Anchor Bay Drive
(established 2010)
Clay Township, MI  48001
UNITED STATES
Phone: 1-586-255-0212


Please leave a phone number and a brief description of any question or concern.
© Copyright 2024 - Rodholderdepot.com
Privacy Policy