Home > Store > 15_degree > lees_15_degree
|
|
Flush Mount Rod Holder 15° Stainless Steel - 2" O.D. LEE'S 3/23
LEE'S
Flush Mount Rod Holder
15° Stainless Steel LEE'S
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
2 "O.D.
RH-529HS Medium
Thank you for choosing Lee’s Tackle. Since 1920 we have been striving to give you the saltwater sportsmen the highest quality, precision sport fishing equipment there is! Using the finest marine materials you can be sure Lee products will last year after year, saving you time and money while making sure that the “Big One” won’t get away with our complete line of rod holders and outriggers
The choice of boat manufacturers and consumers everywhere, Lee's has been the Rod Holder specialist for over 50 years and we continue to offer you the best state of the art fishing products. Choose Lee's when your
buying rod holders.
RH529HS
Uses Backing Plate 31175
Mfg no. RH5931
|
Click for larger image
|
|
Rod Holder Flush Mount 15 Degree Medium 15° - Stainless Steel w/Hose Barb 12/20
LEE'S
Close Ended Rod Holder with Hose Barb - Medium 15° - Stainless Steel- SPECIAL ORDER
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Features:
- Close Ended
- Medium
- 15°
- Standard 1/4" Round Pin
- Stainless Steel
|
Click for larger image
|
|
Flush Mount Rod Holder Heavy Duty Bar Pin 15° LEE'S Stainless Steel - 2" O.D. 3/23
LEE'S
Flush Mount Rod Holder 15 Degree 2.0" O.D. LEE'S
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Heavy Duty Bar Pin All Stainless Steel
RH-529HS/XS Medium 15°
Thank you for choosing Lee’s Tackle. Since 1920 we have been striving to give you the saltwater sportsmen the highest quality, precision sport fishing equipment there is! Using the finest marine materials you can be sure Lee products will last year after year, saving you time and money while making sure that the “Big One” won’t get away with our complete line of rod holders and outriggers.
The choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task.
RH529HS/XS
|
Click for larger image
|
|
Flush Mount Rod Holder 15° Stainless Steel- 2.25" O.D. LEE'S 7/22
LEE'S
LEES_Flush Mount Rod Holder
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
RH-534HS Large 15° Stainless Steel
The choice of boat manufacturers and consumers alike, Lee's has been the rod holder specialist for over 50 years. At Lee's we know fishing . When your in the market for rod holders choose Lee's for reliability, durability and good looks.
Flush Mount Rod Holder 2.25" O.D
RH-534HS Large 15° Stainless Steel
The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.SKU:
|
Click for larger image
|
|
Flush Mount Rod Holder Heavy Duty Bar Pin 15° Stainless Steel - 2.25" O.D. LEE'S 3/23
LEE'S
Flush Mount Rod Holder 15 Degree 2.25" O.D. LEE'S
A Great Product at a Great Price !
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Heavy Duty Bar Pin All Stainless Steel
RH-534HS/XS Large 15°
The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.Thank you for choosing Lee’s Tackle. Since 1920 we have been striving to give you the saltwater sportsmen the highest quality, precision sport fishing equipment there is! Using the finest marine materials you can be sure Lee products will last year after year, saving you time and money while making sure that the “Big One” won’t get away with our complete line of outriggers and rod holders.
|
Click for larger image
|
|
Flush Mount Rod Holder 15 Deg. - Med.Duty for Small Bent Butts SS Swivel Base 2" OD X 6.5" Tube f/ Small Bent Butts 3/23
LEE'S
Swivel Base Rod Holders
15 Degree 2.0" O.D. LEE'S for small bent butts
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Half Angle 15° Short Tube Medium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube. You can be certain your equipment won't fail when it's from Lee's
Without a doubt, our swivel base rod holder is the ultimate rod holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in giant blue fin tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.
Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder.
RH5169H
|
Click for larger image
|
|
Flush Mount Rod Holder 15° Swivel Base Stainless Steel 2.25" OD X 10.5" Tube 3/23
LEE'S
Swivel Base Rod Holders 15 Degree 2.25" O.D.
LEES Stainless Steel
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
RH579
Half Angle 15°
Stainless Steel Flush Mount w/ Swivel Base
Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.
Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder
.
|
Click for larger image
|
|
Flush Mount Swivel Base Rod Holder 15° Stainless Steel - Extra Long Tube 2.25" OD X 14.5" Tube Lee's 3/23
LEE'S
Swivel Base Rod Holders 15 Degree 2.25" O.D. Lee's
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Thank you for choosing Lee’s Tackle. Since 1920 we have been striving to give you the saltwater sportsmen the highest quality, precision sport fishing equipment there is! Using the finest marine materials you can be sure Lee products will last year after year, saving you time and money while making sure that the “Big One” won’t get away! With our complete line of outriggers and rod Holders
RH579XL
Half Angle 15° Extra Long Tube
Stainless Steel Flush Mount w/ Swivel Base
Without a doubt, our swivel base rod holder is the best-in-class Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.
Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder.
SKU:
|
Click for larger image
|
|
|
|
|
|
;)
;)
;)
;)
;)
;)
;)
;)
