Home


Items: 0
Total: $0.00
Shopcart Checkout
 

 


Home > Store > fishing_ski_radar_arches
Jr. River/Sport Fishing Arch, Fishing Tower #220 1/24
FOS
FOS-220

hot offer
FOS-220
Your price:  $1,249.00 - $5,106.25


Input - Boat/Model/Year
Mount Type: 
Mount Width*
Upgrade to Captains Package: 
Add Radar pad: 
Add #109 Net Holder: 
Add Light/Antenna Brackets: 
Add Leg Extensions: 
Add Wedges (free): 
Add #100-14-FD LED Navigation Light: 
Add #180 Quick Swivel Rod Holders: 
Add Narrow Mounts: 
Add Grab Bar: 
Add Rod Holders: 
Add LED Lights: 
Add Track Mounts: 
Add Gin Pole/Pot Puller: 
Shipping to Ontario,CN: 
Add Retention knobs: 
Customer Notes
(Options marked with * are required)



Polished Anodized Jr. River/Sport Arch
 
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
CALL FOR SHIPPING COST QUOTE TO LOCATIONS OUTSIDE THE LOWER 48 STATES
Our arches work well on most aluminum river boats such as Bentz Boats, Koffler Boats, Alumaweld, Hewescraft, Bratt Jet, Rogue, RiverPro, RiverHawk, Thunderjet, Boulton, North River, Weldcraft, KingFisher, Lund, Alumacraft, Starcraft, Duckworth and Rockproof just to name a few.  If you are interested in one of our arches just give us a call 586-255-0212
Fits Most Boats. Adjust from 50" up to 96" Wide.
Up to 52" Tall. You need approximately 2" - 3"  of clearance above the Bimini to ensure you will be able to put the canvas top up and down without hitting the arch. Please measure to ensure you have the required space.
Comes with backing plates, break away mounting hardware and 4 bolt on adjustable rod holders.
You can add bolt on rod holders and mount them where you need, just like the 4 stock ones. Or get the arch and ad extras later.
Very strong and usable unit. Built from 2" schd 40 aluminum tube.
Designed to fold down in a matter of minutes.
Hollow tube all the way through to run and hide wires.  You will need to drill an access hole near the bottom of one of the legs above the mounts approximate 1" above the top of the mounts when the mounts are fully seated in the tube and an exit hole near where you will be mounting your lights on the top cross tube.
Insert a wire during assembly to serve as a cord for pulling the wires through the tube when the assembly is complete.
We recommend using a good quality automotive anti-seize compound on all threads. While not mandatory this additional step will save you work later should you decide to move or disassemble rod holders etc.
Two different style mounts "side and deck". Mounting holes are .278 diameter and are sized for 1/4  20 screws. Stainless steel screws are recommended. Also backing plates are recommended. You may need to cut small amounts of flotation foam under the gunnels on some boats.
When you pick an approximate width you will have 8" of adjustment in and out.
If you have any questions please feel free to call 1-586-255-0212
Unit weighs 50lbs
 
Assembly required. Bolts,nuts and lock washers for holding the bases to the deck or cabin side are not included due to the wide variety of hull and or cabin thicknesses. Purchase the stainless steel bolts, nuts, fender washers and lock washers locally..
This arch can only be shortened a minimal amount (not more than 3")
 
Gin Pole/Crab Pot Puller isavailable for FOS-320,220 & 120 River Arches. Check with us before ordering for these arches.
  Captains Package upgrades to a total of =

BRONZE Economy Package
2 Additional Bolt on Rod Holders Part# 107 ( 2 with 1.91"   clamps)
2 Additional Bolt on Rod Holders Part# 107 ( 2 with 2.375" clamps)
1 Net Holder Part# 109 with 1.91" clamps


SILVER Standard Package
2    Additional Bolt on Rod Holders Part# 107 ( 2 with 1.91"   clamps)
2    Additional Bolt on Rod Holders Part# 107 ( 2 with 2.375" clamps)
1    Net Holder Part# 109 with 1.91" clamps
2    Quick Swivel Rod Holders RH with 1.91" Clamps
1    Light Bracket Set (2 light brackets)  with 1.91" Clamps

 
GOLD Premium Package
2    Additional Bolt on Rod Holders Part# 107 ( 2 with 1.91"   clamps)
2    Additional Bolt on Rod Holders Part# 107 ( 2 with 2.375" clamps)
2    Net Holder Part# 109 with 1.91" clamps
2    Quick Swivel Rod Holders RH with 1.91" Clamps
1    Light Bracket Set 100-13 (2 light brackets)  with 1.91" Clamps
2    Marine Lights 100-20
2    Cup/Drink Holders 100-17  with 1.91" Clamps
2    Universal Multi-Mounts  100-36 with 1.91" Clamps
 
 
More terrific options for your arch, Click on the image or part no. below.

 
 
 
 
 
 
 
 100-18  107  100-17  100-13  100-20  100-15  100-32  100-21
 

 
   
 
 


 
 
 Captains Pkg
 109  180  FOS-22  100-19  100-26 108-2x4
 100-24

 
 

 
 
   


 
 

 

 


 

 

 
 


 

 
 

 

   
 
  ---------------------------------------
 
         

   
Rodholderdepot.com
7900 Anchor Bay Drive
(established 2010)
Clay Township, MI  48001
UNITED STATES
Phone: 1-586-255-0212


Please leave a phone number and a brief description of any question or concern.
© Copyright 2024 - Rodholderdepot.com
Privacy Policy