Home


Items: 0
Total: $0.00
Shopcart Checkout
 

 


Home > Store > fishing_ski_radar_arches
Boat fishing and ski arch - Cross Over Arch,Boat Tower 1/24
FOS
FOS-500

hot offer
FOS-500
Your price:  $1,999.00 - $5,524.95


Input - Boat/Model/Year
Select Mounting Type*
Mounting Width*
Upgrade to Captains Package: 
Upgrade to Captains Pkg: 
Add Rod Holders: 
Add Mounting Wedges: 
Add Net Holder: 
Add Standoffs: 
Add Light/Antenna Brackets: 
Add Radar Mounting Stanchion: 
Add Radar Pad: 
Add Led Lights: 
Add #100-14-FD LED Navigation Light: 
Customer Notes:
(Options marked with * are required)


Radar, Fish & Ski Arch - Cross Over Arch
                    
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
CALL FOR SHIPPING COST QUOTE TO LOCATIONS OUTSIDE THE LOWER 48 STATES
New Design, extra interior bracing adds extra strength and beauty. Add even  more strength to side mounts with standoffs option.

Our arches work well on most aluminum river boats such as Bentz Boats, Koffler Boats, Alumaweld, Hewescraft, Bratt Jet, Rogue, RiverPro, RiverHawk, Thunderjet, Boulton, North River, Weldcraft, KingFisher just to name a few.  If you are interested in one of our arches just give us a call 586-255-0212

This arch is designed for both ends of fun on the water.

       Use it to fish, and or to wake board or ski.
 
       Built with a wider stance on the bottom and extra braces for strength.
 
       Come stock with 4 rod clamp on holders and TOW point boss.
Fits Most Boats. Adjust from 55" up to 96" Wide.
 
Hollow tube all the way through to run and hide wires.  You will need to drill an access hole near the bottom of one of the legs above the mounts approximate 1" above the top of the mounts when the mounts are fully seated in the tube and an exit hole near where you will be mounting your lights on the top cross tube.
Insert a wire during assembly to serve as a cord for pulling the wires through the tube when the assembly is complete.
We recommend using a good quality automotive anti-seize compound on all threads. While not mandatory this additional step will save you work later should you decide to move or disassemble rod holders etc.
Two different style mounts "side and deck". Mounting holes are .278 diameter and are sized for 1/4  20 screws. Stainless steel screws are recommended. Also backing plates are recommended. You may need to cut small amounts of flotation foam under the gunnels on some boats.
  5 Year Warranty
 
Assembly required. Bolts,nuts and lock washers for holding the bases to the deck or cabin side are not included due to the wide variety of hull and or cabin thicknesses. Purchase the stainless steel bolts, nuts, fender washers and lock washers locally.
 
**** Select standoff option for increasing strength of side mounts.
 The height of this arch cannot be trimmed or shortened.
 
 More terrific options for your arch, Click on the image or part no. below.
 
   
           
 
 
 
 
 
 
 
 100-18  107  100-17  100-13  100-20  100-15  100-32  100-21
 

 
   
 
 


 
 
 Captains Pkg
 109  180  FOS-22  100-19  100-26 108-2x4
 100-24
 

Captains Package upgrades to a total of =

BRONZE Economy Package
2 Additional Bolt on Rod Holders Part# 107 ( 2 with 1.91"   clamps)
2 Additional Bolt on Rod Holders Part# 107 ( 2 with 2.375" clamps)
1 Net Holder Part# 109 with 1.91" clamps


SILVER Standard Package
2    Additional Bolt on Rod Holders Part# 107 ( 2 with 1.91"   clamps)
2    Additional Bolt on Rod Holders Part# 107 ( 2 with 2.375" clamps)
1    Net Holder Part# 109 with 1.91" clamps
2    Quick Swivel Rod Holders RH with 1.91" Clamps
1    Light Bracket Set (2 light brackets)  with 1.91" Clamps

 
GOLD Premium Package
2    Additional Bolt on Rod Holders Part# 107 ( 2 with 1.91"   clamps)
2    Additional Bolt on Rod Holders Part# 107 ( 2 with 2.375" clamps)
2    Net Holder Part# 109 with 1.91" clamps
2    Quick Swivel Rod Holders RH with 1.91" Clamps
1    Light Bracket Set 100-13 (2 light brackets)  with 1.91" Clamps
2    Marine Lights 100-20
2    Cup/Drink Holders 100-17  with 1.91" Clamps
2    Universal Multi-Mounts  100-36 with 1.91" Clamps


.

 
 
 
                                                                                            
 
 
 
     

   
Rodholderdepot.com
7900 Anchor Bay Drive
(established 2010)
Clay Township, MI  48001
UNITED STATES
Phone: 1-586-255-0212


Please leave a phone number and a brief description of any question or concern.
© Copyright 2024 - Rodholderdepot.com
Privacy Policy