Items: 0
Total: $0.00
Shopcart Checkout
Company Logo


Home > Store > fishing_ski_radar_arches
Jr. River Cross Over Arch, Boat Tower 2/16

Your price:  $999.95 - $2,474.40

Input - Boat/Model/Year*
Select Mounting Width: 
Select Mounting Type: 
Add Radar Pad: 
Add Light/Antenna Brackets: 
Add Navigation Light: 
Add Rod Holders: 
Add Standoffs: 
Add Universal Mount: 
Add LED Lights: 
Add Net Holders: 
Add Mounting Wedges: 
Upgrade to Captains Package: 
Shipping to most Canadian Locations: 
Free Long Sleeve Shirt: 
Select Shirt Size: 
Customer Notes:
Customer Special Request
(Options marked with * are required)

Great River Style Arch
Built with plenty of extra support for towing.

 If you have a river boat you have already seen our top quality arches. Our arches work well on most aluminum river boats such as Bentz Boats, Koffler Boats, Alumaweld, Hewescraft, Bratt Jet, Rogue, RiverPro, RiverHawk, Thunderjet, Boulton, North River, Weldcraft, KingFisher Lund, Starcraft, Alumacraft, and Rockproof just to name a few.  If you are interested in one of our arches just give us a call 586-255-0212
Fits Most Boats. Adjust from 70" up to 96" Wide
 Comes with 4 Bolt on Rod Holders, Break Away Mounts, and Tow Boss.

Built from 2" Schedule 40 Pipe with 1" Schedule 40 accent parts.

Designed to fold down in a matter of minutes.

Hollow tube all the way through to run and hide wires.  You will need to drill an access hole near the bottom of one of the legs above the mounts approximate 1" above the top of the mounts when the mounts are fully seated in the tube and an exit hole near where you will be mounting your lights on the top cross tube.
Insert a wire during assembly to serve as a cord for pulling the wires through the tube when the assembly is complete.
We recommend using a good quality automotive anti-seize compound on all threads. While not mandatory this additional step will save you work later should you decide to move or disassemble rod holders etc.
Two different style mounts "side and deck". Mounting holes are .278 diameter and are sized for 1/4  20 screws. Stainless steel screws are recommended. Also backing plates are recommended. You may need to cut small amounts of flotation foam under the gunnels on some boats.
When you pick an approximate width you will have 5" of adjustment in and out.

Unit weighs 70lbs.

Made in Michigan.
Assembly required. Bolts,nuts and lock washers for holding the bases to the deck or cabin side are not included due to the wide variety of hull and or cabin thicknesses. Purchase the stainless steel bolts, nuts, fender washers and lock washers locally.

***Select standoff option for increasing strength of side mounts.

**Shipping to most easily accessible Canadian locations is $130.00 USD, Check with us for shipping to remote locations.
 More terrific options for your arch, Click on the image or part no. below.
 100-18  107  100-17  100-13  100-20  100-15  100-32  100-21


 Captains Pkg
 109  180  FOS-22  100-19  100-26 108-2x4

Captains Package upgrades to a total of =

8 Bolt on Rod Holders Part# 107
1 Radar Pad
1 Light Bracket Set Part# 100-13
2 Quick Swivel Rod Holders Part# 180
1 Net Holder Part# 109

A $400 value for $275.00

You can swap some items, however not all items have the same swap value. The rod holders, net holder, radar pad and light bracket set are even swaps. There is a $15.00 up charge to swap one of the items included for a the swivel mount rod holder.
Check with us if you want to swap items included in the captains package.

Jr. River CrossOver

Jr. River CrossOver
Jr. River CrossOver

Jr. River CrossOver







7900 Anchor Bay Drive
Clay Townswhip, MI  48001
Phone: 1-586-255-0212

Be sure to leave a phone number where you can be reached and a brief description of your question or concern. If you have a question on a specific product please include the part number or SKU in your message.
© Copyright 2018 - Rodholderdepot.com
Privacy Policy