Items: 0
Total: $0.00
Shopcart Checkout


Home > Store > fishing_ski_radar_arches
Boat fishing and ski arch - Cross Over Arch,Boat Tower 7/22

hot offer
Your price:  $1,891.95 - $4,047.75

Input - Boat/Model/Year
Select Mounting Type*
Mounting Width*
Upgrade to Captains Pkg: 
Add Rod Holders: 
Add Mounting Wedges: 
Add Net Holder: 
Add Standoffs: 
Add Light/Antenna Brackets: 
Add Radar Mounting Stanchion: 
Add Radar Pad: 
Add Led Lights: 
Add #100-14-FD LED Navigation Light: 
Customer Notes:
(Options marked with * are required)

Radar, Fish & Ski Arch - Cross Over Arch
New Design, extra interior bracing adds extra strength and beauty. Add even  more strength to side mounts with standoffs option.

Our arches work well on most aluminum river boats such as Bentz Boats, Koffler Boats, Alumaweld, Hewescraft, Bratt Jet, Rogue, RiverPro, RiverHawk, Thunderjet, Boulton, North River, Weldcraft, KingFisher just to name a few.  If you are interested in one of our arches just give us a call 586-255-0212

This arch is designed for both ends of fun on the water.

       Use it to fish, and or to wake board or ski.
       Built with a wider stance on the bottom and extra braces for strength.
       Come stock with 4 rod clamp on holders and TOW point boss.
Fits Most Boats. Adjust from 55" up to 96" Wide.
Hollow tube all the way through to run and hide wires.  You will need to drill an access hole near the bottom of one of the legs above the mounts approximate 1" above the top of the mounts when the mounts are fully seated in the tube and an exit hole near where you will be mounting your lights on the top cross tube.
Insert a wire during assembly to serve as a cord for pulling the wires through the tube when the assembly is complete.
We recommend using a good quality automotive anti-seize compound on all threads. While not mandatory this additional step will save you work later should you decide to move or disassemble rod holders etc.
Two different style mounts "side and deck". Mounting holes are .278 diameter and are sized for 1/4  20 screws. Stainless steel screws are recommended. Also backing plates are recommended. You may need to cut small amounts of flotation foam under the gunnels on some boats.
  5 Year Warranty
Assembly required. Bolts,nuts and lock washers for holding the bases to the deck or cabin side are not included due to the wide variety of hull and or cabin thicknesses. Purchase the stainless steel bolts, nuts, fender washers and lock washers locally.
**** Select standoff option for increasing strength of side mounts.
 The height of this arch cannot be trimmed or shortened.
 More terrific options for your arch, Click on the image or part no. below.
 100-18  107  100-17  100-13  100-20  100-15  100-32  100-21


 Captains Pkg
 109  180  FOS-22  100-19  100-26 108-2x4

Captains Package upgrades to a total of=

8 Bolt on Rod Holders Part# 107 (4 come with your arch & 4 with Capt. Pkg)
1 Light Bracket Set Part# 100-13
2 Quick Swivel Rod Holders Part# 180
1 Net Holder Part# 109

You can swap some items, however not all items have the same swap value. The rod holders, net holder, radar pad and light bracket set are even swaps. There is a $15.00 up charge to swap one of the items included for a the swivel mount rod holder.
Check with us if you want to swap items included in the captains package.


7900 Anchor Bay Drive
(established 2010)
Clay Township, MI  48001
Phone: 1-586-255-0212

Please leave a phone number and a brief description of any question or concern.
© Copyright 2023 - Rodholderdepot.com
Privacy Policy