Home > Store > night vision,radar
|
Fold Down All Around Light - 26" SEA DOG 1/24
SEA DOG
Fold Down All Around Light - 26"
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Fold
Down 360° All Around Lights folds down easily for storage and comes
with a white translucent lens. For replacement of existing lighting (not
for new construction). Constructed of injection molded nylon and
aluminum. Installs with four #10 FH fasteners (not included). 12VDC.
All
USCG approved navigation lights must be mounted properly to provide the
correct visual alignment and allow unimpeded sight lines. Please refer
to USCG regulations for 1 NM and 2 NM navigation lights for more
information
|
Click for larger image
|
|
Light Arm Receiver Edson Vision Series 1/24
EDSON
Light Arm Receiver for Aft Angled Mounts
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
The
Light Arm Receiver secures a Light Arm to the mounting plate on Edson
Vision Series Aft Angle Mounts. Edson's Light Arm Receivers require an
Edson Mounting Plate and an Edson Vision Series Mount.
Specifications:
Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mounts sold separately
|
Click for larger image
|
|
LED Masthead Light - 2 NM - 225 SEA DOG 1/24
SEA DOG
LED Masthead Light - 2 NM - 225°
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
LED
225° Masthead Lights are fixed mounted and approved for USCG 2 NM
(Colreg 2 mile). Constructed of UV stabilized injection molded
polycarbonate. Installs with two #12 RH fasteners (not included). 12VDC.
Low amp draw.
All USCG approved navigation lights must be
mounted properly to provide the correct visual alignment and allow
unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2
NM navigation lights for more information.
|
Click for larger image
|
|
PERKO COMBINATION LIGHT 1197 with 50 ft pigtail EDSON VISION SERIES 1/24
EDSON
Perko Combination Anchor/Steaming Light (50" Wire Length)
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Edson
offers the 67500 Perko Combination Anchor/Steaming Light (50" Wire
Length) that is specifically designed for Edson's Vision Series Light
Arms. All-Round White Light with 12 volt bulb and is constructed
of Black Polymer and Chrome Plated Zinc Alloy Top.
Certified For Use on Sail or Power Driven Vessels Under 20 Meters (65.6 ft.) in Length
The
67500 Perko Combination Anchor/Steaming Light requires an Edson Light
Arm that is secured to a Vision Series Base Mount with a Light Arm
Receiver and Radar Mounting Plate. Order Edson's Light Arm, Light Arm
Receiver, Base Mount and Mounting Plate separately.
|
Click for larger image
|
|
Telescopic LED All Around Light - 26" - 48" Removable Sea-Dog 1/24
SEA DOG
LED Removable Telescopic All Around Light - 26" - 48"
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
LED
Removable Telescopic 360° All Around Lights are approved for USCG 2NM
(Colreg 2 mile). Constructed of injection molded nylon and aluminum.
12VDC. Low amp draw. Installs with three #8 FH fasteners (not
included).
All USCG approved navigation lights must be mounted
properly to provide the correct visual alignment and allow unimpeded
sight lines. Please refer to USCG regulations for 1 NM and 2 NM
navigation lights for more information
|
Click for larger image
|
|
Hella Marine NaviLED 360 Compact All Round White Navigation Lamp - 2nm - Fixed Mount - Black Base 1/24
HELLA
NaviLED 360 Compact All Round White Navigation Lamp - 2nm - Fixed Mount - Black Base
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
With
a compact mounting footprint Hella marine NaviLED 360 Compact lamps
feature single LED efficiency, advanced Multivolt™ electronics and
precision optics for reliable and highly visible all round lighting.
With
less than 1W of consumption, NaviLED 360 Compact lamps draw a fraction
of the energy required to run a conventional 2 nautical mile
incandescent lamp.
No bulbs, No maintenance. Ultra long service life
Hella
marine LED technology has no filaments to break making NaviLED lamps
extremely shock and vibration proof for reliability and safety in
demanding conditions.
Multivolt™ 9-33V DC
Advanced
electronics ensure reliable illumination and lamp protection even under
severe voltage fluctuations and low battery voltages. The compact
Multivolt™ drive circuitry provides reverse polarity, spike and
over-voltage protection for long life and reliable operation.
Safe and highly visible
Hella marine optics deliver 100% correct light output and enhance visibility compared to bulb navigation lamps.
Fully sealed for life. IP 67 Certified
Each
NaviLED 360 Compact lamp is a completely sealed unit, highly UV and
corrosion resistant. High impact housings ensure durability from waves
and impact. NaviLED 360 Compact anchor lamps have undergone extensive
‘tested to destruction’ programs to help lift product reliability to a
new standard.
Specifications:
- Material Description: UV and impact resistant plastic housing and heavy duty Grilamid lens
- Minimum Visible Distance: 2 Nautical Miles (Yacht and Powerboats)
- Cable: Pre-wired with 500mm of twin core cable
- Operating VoltageMultivolt 9-33V DC
- Power Consumption: <1W
- Degree of Protection: IP 67 - Completely Sealed
- Weight: 90g including cable
- Approvals: IMO Col Reg 72, Wheelmark, RCD, USCG, ABYC A-16, Maritime NZ
|
Click for larger image
|
|
6° RADAR Wedge f/7 x 7 Radar Mount Base Plate Seaview 1/24
SEAVIEW
Seaview 6° Wedge f/7 x 7 Radar Mount Base Plate
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
PM-W6-7
This 6° wedge goes between your
Seaview mount and mounting surface. The base of the wedge is 7"x7" and
is made from machined King Starboard . Utilize wedges to compensate for
deck angle or planning attitude of the boat.
|
Click for larger image
|
|
RADAR WEDGE 4° Base Wedge f/Composite & Aluminum Mounts Scanstrut PT3010 1/24
SCANSTRUT
Scanstrut PT3010 4° Base Wedge f/Composite & Aluminum Mounts
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Benefits
Designed to provide a level horizon for
your radar when your boat is bows up and on the plane, maximizing the
performance of your antenna.
Simple to install and supplied with
our excellent pre-fitted watertight base seal, our base wedges can be
stacked on top of one another to compensate for greater trim angles.
Part numbers
PT3010 - Made from marine grade polymer. Fits below all Composite and Aluminium PowerTower bases
|
Click for larger image
|
|
RADAR TOP PLATE -Seaview Modular Plate f/Most Closed Dome & Open Array Radar 1/24
SEAVIEW
Seaview Modular Plate f/Most
Closed Dome & Open Array Radar
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
ADA-R1
Seaview's innovative new modular
electronic mounts feature a unique universal plate design that provide a
cleaner look and greater installation flexibility. A pre-drilled
anodized aluminum plate is incased inside the UV stable white ABS
plastic. There are dimple holes on the top surface of the top plate that
matches up with a drill template allowing you to precisely drill the
appropriate holes for your specific radar. The end result is a nice
clean look with no unwanted visible holes.
This is one of Seaview's more popular Modular Top Plates.
Fits almost all Closed Dome and Open Array Radars.
- Furuno 15" - 24" Radar Domes and 4' - 6' Open Array Radar
- Garmin 18"-24" Radar Domes and 4'-6' Open Array Radars
- Geonav 24" Radar Domes and 4'-6' Open Array Radars
- JRC 15" Radar Domes, Koden 18"-24" Radar Domes and 4'-6' Open Array Radars
- Lowrance 18"-24" Radar Domes BR24 / 3G / 4G / Halo24 and 4'-6' Open Array Radars
- Lorenz 12"-24" Radar Domes and 4'-6' Open Array Radars
- Nobeltec 17"-25" Radar Domes and 3.5'-6' Open Array Radars
- Raymarine 18"-24" Radar Domes and 4'-6' Open Array Radars
- Simrad 18"-24" Radar Domes / BR24 / 3G / 4G / Halo24 and 4'-6' Open Array Radars
- Sitex 12"-24" Radar Domes and 4'-6' Open Array Radars
- Seiwa / Techmarine 12"-24" Radar Domes and 4'-6' Open Array Radars.
|
Click for larger image
|
|
RADAR Mounting Plate - Garmin 4' Open Array Edson Vision Series 1/24
EDSON
Garmin 4ft Open Array Mounting Plate
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
With
Edson's Vision Series Mounting System, you can select your desired
Mounting Plate to best fit your electronics. Edson's 68560 Vision Series
Mounting Plate is designed for Garmin 4ft Open Array Radars (GMR 424
xHD2, GMR 624 xHD2, GMR 1224 xHD2, GMR 2524 xHD2, GRM Fantom 4).
Specifications:
Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mounts sold separately
|
Click for larger image
|
|
RADAR Mounting Plate - Raymarine 4' Open Array EDSON VISION SERIES 1/24
EDSON
Raymarine 4ft Open Array Radar Mounting Plate
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
With
Edson's Vision Series Mounting System, you can select your desired
Mounting Plate to best fit your electronics. Edson's 68580 Vision Series
Mounting Plate is designed for Raymarine 4ft Open Array Radar (Quantum,
Quantum 2, RD418D, RD424D, RD418HD, RD424HD).
Specifications:
Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mounts sold separately
|
Click for larger image
|
|
Furuno 15M Power Cable f/DRS4W 1/24
FURUNO
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
15M Power Cable for DRS4W
The 15M Power Cable is specifically for Furuno's DRS4W
|
Click for larger image
|
|
Edson Vision Series RADAR Mounting Plate - Furuno 15-24" Dome & Sitex 2KW/4KW Dome 1/24
EDSON
Furuno & Sitex Mounting Plate
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
With
Edson's Vision Series Mounting System, you can select your desired
Mounting Plate to best fit your electronics. Edson's 68510 Vision Series
Mounting Plate is designed for both SiTex 2kw, 4kw Radar Domes (T-2041,
MDS-9, MDS-8, MDS-1, T-941, T-921, T-761, T-760) and Furuno 2kw, 4kw
Radars (15", 18”, 19” and 24" Domes and 3.5’ & 4' Open Arrays).
Specifications:
Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mounts sold separately
|
Click for larger image
|
|
Light Arm f/Radar & Sat Domes Edson Vision Series 1/24
EDSON
Light Arm for Radar Domes and Sat Domes
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Edson's
68650 Vision Series Light Arm allows you to attach your Navigation
Light to your Edson Vision Series Mount with a Radar Dome and Satellite
Dome.
Light Arm extends 14" toward the stern allowing room for
your Radar or Satellite Dome. The Light Arm is 28" tall, which meets
Coast Guard standards for navigation lights.
Edson's Light Arm
requires a Light Arm Receiver that is dependent on the style of Vision
Series Mount you have (Aft Angled or Vertical).
Specifications:
Mounting Plates and Light Arm Receiver are required to complete an Edson Vision Series Mounting System. (sold separately)
Base mounts sold separately
|
Click for larger image
|
|
4 Degree Wedge f/Open Array Radars - Seaview RW4-3 1/24
SEAVIEW
Seaview RW4-3 4 Degree Wedge f/Open Array Radars
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Radar Wedges Are Designed To Be Used
Directly Between The Radome And The Mounting Surface. This Will
Compensate For Deck Angle Or Planing Attitude Of The Boat.
Compatible Brands
(Use directly between the open array and mounting surface)
Furuno
Simrad
Koden
Lowrance
Navman
Nobeltec
Northstar (before year 2007)
Maptech
Sitex
Garmin Open Array Radars
|
Click for larger image
|
|
RADAR LIGHT POLE -PowerTower® Starboard Mounted Bar For Light, GPS, VHF & Navtex SCANSTRUT SC111 1/24
SCANSTRUT
Scanstrut SC111 PowerTower® Starboard Mounted Bar For Light, GPS, VHF & Navtex
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Mounts light, GPS, VHF and Navtex antennas above the radar,
clear of all obstructions for maximum performance and visibility.
Features
- SC111 Starboard mounted GPS / VHF / Navtex bar
- Fits all PowerTower models and all SC100 Poles and SC2 poles
- Suitable for all 12", 18" and 24" radomes
- All mounting holes pre-drilled for easy retrofit installation
- All cables run internally
-
GPS / VHF / Navtex bars are available in both port and starboard
mounted options allowing up to two additional antennas to be mounted
above the main radar
- Port mounted light bar fits all Perko series 200 and Aqua signal series 25 & 40 all round white lights
- GPS / VHF / Navtex bar fits standard 14TPI 1" GPS mounts
OPTIONAL ACCESSORIES:
|
Click for larger image
|
|
LIGHT ARM FOR OPEN ARRAY RADAR SYSTEMS - EDSON VISION SERIES 1/24
EDSON
Light Arm for Open Array Radars
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Edson's
68660 Vision Series Light Arm allows you to attach your Navigation
Light to your Edson Vision Series Mount with a Open Array Radar.
Light
Arm extends 28" toward the stern allowing room for your Radar or
Satellite Dome. The Light Arm is 28" tall, which meets Coast Guard
standards for navigation lights.
Edson's Light Arm requires a
Light Arm Receiver that is dependent on the style of Vision Series Mount
you have (Aft Angled or Vertical).
Specifications:
Mounting Plates and Light Arm Receiver are required to complete an Edson Vision Series Mounting System. (sold separately)
Base mounts sold separately
|
Click for larger image
|
|
RADAR LIGHT POLE - Scanstrut SC110 PowerTower® Port Mounted Light Bar 1/24
SCANSTRUT
Scanstrut SC110 PowerTower® Port Mounted Light Bar
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Mount light above the radar, clear of all obstructions for maximum performance and visibility.
Features
- Fits all PowerTower models and all SC100 Poles and SC2 poles
- Suitable for all 12", 18" and 24" radomes
- All mounting holes pre-drilled for easy retrofit installation
- All cables run internally
- Port mounted light bar fits all Perko series 0455, 0466, and Aqua signal series 25 & 40 all round white lights
|
Click for larger image
|
|
RADAR LIGHT POLE -Scanstrut SC112 PowerTower® Port Mounted Bar f/GPS, VHF & Navtex 1/24
SCANSTRUT
PowerTower® Port Mounted Bar f/GPS, VHF & Navtex
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Mounts light, GPS, VHF and Navtex antennas above the radar, clear of all obstructions for maximum performance and visibility.
Features
- SC112 Port mounted GPS / VHF / Navtex bar
- Fits all PowerTower models and all SC100 Poles and SC2 poles
- Suitable for all 12", 18" and 24" radomes
- All mounting holes pre-drilled for easy retrofit installation
- All cables run internally
- GPS
/ VHF / Navtex bars are available in both port and starboard mounted
options allowing up to two additional antennas to be mounted above the
main radar
- GPS / VHF / Navtex bar fits standard 14TPI 1" GPS mounts
|
Click for larger image
|
|
4 Degree wedge for Simarad HALO Open Array Radar SEAVIEW 1/24
SEAVIEW
Direct Mount 4° Wedge f/Simrad HALO™
Open Array Radar
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Improve
your radar performance with a Seaview direct mount Angled Wedge. This
wedge angles your radar 4° below the horizontal. Fits directly with
your Simrad HALO™ Open Array Radar.
Simple & Easy Installation
Pre-drilled to fit your specific radar, allowing for quick and easy hassle free installation.
Improve
your radar performance with a Seaview direct mount Angled Wedge. This
wedge angles your radar 4° below the horizontal. Fits directly with
your Simrad HALO™ Open Array Radar.
Simple & Easy Installation
Pre-drilled to fit your specific radar, allowing for quick and easy hassle free installation.
|
|
Click for larger image
|
|
RADAR MOUNT Edson Vision Mount 6" Aft Angled 1/24
EDSON
The Vision Series Mounting System is a revolutionary design that
provides the simplest, most attractive solution to your electronics
mounting requirements.
Features:
- All-new sleek, modern design
- First all modular system - extremely versatile
- Simple selection and installation
- Easy to add accessories
- Powder coated aluminum
- Requires Vision Mounting Plate to install radar or sat dome antenna
6" Aft Angled Mount
- 6" tall
- Aft Raked 30 degree
|
Click for larger image
|
|
RADAR MOUNT 6" Aluminum PowerTower® f/2kW & 4kW Raymarine, Garmin & Navico 1/24
SCANSTRUT
6" Aluminum PowerTower® for 2kW/4kW Raymarine; Garmin & Navico 3G/4G Radomes
Features:
- Central Accessory Bar with Easy-Fit Mount System for Fast Installation
- 100% Watertight Installation; No Sealant Required
- No Visible Cables
|
Click for larger image
|
|
10" Aluminum PowerTower® f/2kW/4kW Raymarine; Garmin & Navico 3G/4G Radomes SCANSTRUT 1/24
SCANSTRUT
10" Aluminum PowerTower® for 2kW/4kW Raymarine; Garmin & Navico 3G/4G Radomes
Features:
- Central Accessory Bar with Easy-Fit Mount System for Fast
Installation
- 100% Watertight Installation; No Sealant Required
- No Visible Cables
|
Click for larger image
|
|
RADAR MOUNT/GRAB HANDLES 1/24
DOLPHIN
DOLPHIN RADAR MOUNT WITH GRAB HANDLES
(RADAR AND DOME NOT INCLUDED)
CHOOSE SHIPPING OPTION
Adjustable mounting width to fit all Dolphin t tops;
Connect on the 2 joint fittings of t top frame and enhance your t top strength;
With 2 U shaped handles offering more convenience;
20in x 20in aluminum plate to support your radar arch (You will need to drill mounting holes according to your need);
Built from strong aluminum;
Clamp size 2in with 1.5in rubber collar;
Anodized finish.
|
Click for larger image
|
|
Light Arm Receiver f/ Aft Angled Mounts Edson Vision Series Wing 1/24
Wing Light Arm Receiver for Aft Angled Mounts
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Edson's
68640 Wing Light Arm Receiver secures a Light Arm to the mounting plate
on Edson Vision Series Aft Angled Mounts while providing two wings to
mount adding space for GPS Antennas and other electronics.
Specifications:
Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mounts sold separately
|
Click for larger image
|
|
6" PowerTower® Composite f/Radomes & Small Satcom/TV Antenna SCANSTRUT 1/24
SCANSTRUT
6" PowerTower® Composite for Radomes & Small Satcom/TV Antenna
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Fits: 2kW/4kW Raymarine; Garmin and Navico BR24/3G/4G radomes
Expertly
designed to install your antenna on the cabin roof, flybridge or radar
arch of your powerboat, providing a clear view of the horizon for
maximum antenna performance.
Scanstrut's Composite PowerTower
offers a single "monocoque" structure for outstanding strength and
surface finish. Its aerodynamic shape and high gloss finish makes a
product that is as strong as it is attractive.
Features:
- Watertight
Installation - Pre-fitted IP65 gland to seal cable entry into stem and a
watertight base seal included so no need for messy sealant
- Ease of Install - Pre-drilled mounting holes, the antenna fastens to PowerTower top plate using own mounting bolts
- Choice of Heights - 150mm (6") or 350mm (14") heights available
- Aesthetic
Single Piece Moulding - Curves and strength to suit any boat with a 30°
aft leaning profile to compliment any powerboat
|
Click for larger image
|
|
6" PowerTower® Polished Stainless Steel f/Raymarine 2kW & 4kW Domes SCANSTRUT 1/24
SCANSTRUT
6" PowerTower® Polished Stainless Steel f/Raymarine 2kW & 4kW Domes
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
A new marine grade polished stainless steel 6" PowerTower®
for mounting all 2kW and 4kW radomes. Supplied with grommet and
watertight base seal for simple installation, the SPT1001 and SPT1002
have all cables routed inside.
The minimal footprint (6"x6") of this PowerTower® allows an easy fit on most power boats.
|
Click for larger image
|
|
RADAR MOUNT 6" Aft Angled - Heavy Duty f/Open Array Radars Edson Vision Series 1/24
EDSON
Vision Series Mount - 6" Aft Angled -
Heavy Duty for Open Array Radars
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
The
Vision Series Mounting System is a revolutionary design that provides
the simplest, most attractive solution to your electronics mounting
requirements.
Features:
- All-new sleek, modern design
- First all modular system - extremely versatile
- Simple selection and installation
- Easy to add accessories
- Powder coated aluminum
- Requires Vision Mounting Plate to install radar or sat dome antenna
6" Heavy Duty Aft Mount
- 6" Tall
- Aft raked 30 degrees
|
Click for larger image
|
|
RADAR MOUNT 12" Aft Angled Heavy Duty - Open Array Edson Vision SERIES 1/24
EDSON
Edson Vision Mount 12" Aft Angled Heavy Duty - Open Array
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
The Vision Series Mounting System is a revolutionary design that
provides the simplest, most attractive solution to your electronics
mounting requirements.
Features:
- All-new sleek, modern design
- First all modular system - extremely versatile
- Simple selection and installation
- Easy to add accessories
- Powder coated aluminum
- Requires Vision Mounting Plate to install radar or sat dome antenna
12" Heavy Duty Aft Mount
- 12" Tall
- Aft raked 30 degrees
|
Click for larger image
|
|
Wireless Radar Furuno 1st Watch using your IOS device 1/24
FURUNO
1st Watch Wireless Radar
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Untether & Explore - Furuno 1st Watch Wireless Radar, that you can access directly from your iOS devices.
Move Around & Explore
With
Furuno's 1st Watch Wireless Radar, you can do things previously
impossible. You can bring the Radar display whenever you go, even put it
on the iPhone in your pocket. Since the display is untethered, you are
free to roam the vessel while maintaining full situational awareness of
your surroundings. For example, you can bring the Radar display with you
when jumping into the cabin quickly to grab fishing gear or other tools
needed during your voyage.
Easy To Use At 1st Glance
Plug
in the Radar, set up the free app from App Store and you're good to go.
With familiar gestures it's a breeze to use; you can even use two iOS
devices simultaneously. The app has been created with simplicity and
efficiency in mind, providing reliable information that is easily
accessible.
Less Cables, More Flexibility
Installation
is simple with its compact and lightweight Radar antenna. Mount it, plug
in the power cord and you're done. Due to the portability of the iOS
devices this makes the system a good option for boats where space
constrictions are of concern.
Features:
- 4kW Radar antenna, powerful yet compact in size (same housing as DRS2D)
- Wireless LAN, first Radar in the world accessible from your iOS devies
- No extra wiring needed except the power source, making installation a breeze
- Exceptionally simple setup and intuitive operation with user-friendly and free iOS app
- Extremely economical power consumption
- Vivid, multi-color Radar target presentation (1/8nm - 24nm)
- Simple touch interface with familiar gestures
- User selectable range scale from 0.125 to 24 nm
- Simultaneously connect and utilize 2 iOS devices, via high-sensitivity wireless signal
Price: $1,249.95 - $1,374.95
|
Click for larger image
|
|
Radar Pole Mount 6' Kit f/Raymarine 2kW & 4kW Dome Scanstru 1/24
SCANSTRUT
Scanstrut Radar Pole Mount 6' Kit f/Raymarine 2kW & 4kW Dome
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Scanstrut's SC101 Pole Mount allows installation of your
radar or 30cm or 40cm satcom antenna onto the deck or transom of your
boat.
Features:
- Adjustable base, able to rotate through 360x and angle from horizontal all the way to vertical
- Unique pole extrusion accommodates two cable channels with a cover strip to hold cables in place
- Supplied with two support modules providing maximum fore / aft and sideways bracing
- Easily removed for racing or winter storage, leaving just low profile base on deck
Dimensions:
- 1.9m / 6.4' recommended for deck mounting
- 3" diameter pole
- Base diameter of just 80mm / 3.1"
Materials:
- Marine grade 6082 aluminium pole
- Polyester powder coated for a durable and gloss white finish
Kit includes:
|
Click for larger image
|
|
CHIRP Radar Humminbird HB2124 1/24
HUMMINBIRD
Humminbird 2124 CHIRP RADAR
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Compatible with select
networking HELIX models and ONIX, Humminbird CHIRP Radar features CHIRP
pulse compression, setting a new standard for compact solid state
radar. It delivers superior RADAR imaging on both long and extremely
short ranges. This translates to better situational awareness in
low-visibility conditions and helps identify birds and floating
obstacles for clues to where gamefish are located. You can also track
weather and vessels with amazing definiton.
Features:
- Antenna Dimension - 21" Enclosed Dome
- Antenna Type - Patch Array
- Peak Power Output - 20W
- Transmit Frequency - 9354 to 9446 MHz
- Beam width (nominal) - 4.9° Horizontal and 20° Vertical
- Input Voltage - 12 or 24 VDC (Miniumum - 10.8 Volts, Maximum - 31.2 Volts)
- Networking - Ethernet
- Maximum Range Scale - from 1/16 to 24 nautical miles
- Power Consumption - Transmit mode - 17W; Standby Mode - 7W; Sleep Mode - 2W
- Duplexer - Circulator
- Pulse Widths @ 3 dB - 40 ns to 14.7µs
- CHIRP Lengths - 400 ns to 20µs
- CHIRP Bandwidth - Up to 32 MHz
- IF Bandwidth - 26 MHz
- Noise - Less than 4 dB
- Polarization - Horizontal
- Waterproofing - IPX6
- Weight - 12.3 lbs (5.6 kg)
- Compatibility Networking HELIX models and all ONIX models
|
Click for larger image
|
|
SI-TEX 4kW Hi-Res 24" Digital Radome Radar w/Internal WiFi Module & 10M Cable f/All NavPro Units 1/24
SI-TEX
4kW Hi-Res 24" Digital Radome Radar with Internal WiFi Module & 10M Cable for All NavPro Units
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Features:
- Adjustable VRM and EBL function provides precise range and bearing information to any target displayed
- Target
intensity is shown in color shades to assist the operator in
differentiating between large and small vessels and weather severity
- Other
features include interference rejection caused by other radars
operating nearby, FTC to reduce Rain Clutter and STC to pick out targets
hidden by high seas and spray
- 24" 4kW Hi-Res Radome Radar
- Includes Internal WiFi Module
|
Click for larger image
|
|
HALO20 20" Radar Dome w/10M Cable - SIMRAD 1/24
SIMRAD
HALO20 20" Radar Dome with 10M Cable
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Unrivalled Short-To-Mid-Range Performance
Extend
your view from the bow of your boat out to 24 nautical miles with
pulse-compression radar technology that not only delivers a powerful mix
of short and long-range detection, but provides precise target
definition with minimal clutter.
Better Situational Awareness, Collision Avoidance
HALO20
radar delivers a comprehensive range of features to enhance your
situational awareness and on-water safety. Monitor selected collision
hazards with MARPA target tracking, tracking up to 10 targets, or 20 in
dual range. Whether you’re navigating through crowded waterways or
contending with poor visibility, HALO20 radar cuts through the clutter
to give you a clear and current picture of your surroundings.
Ready Instantly
HALO20
Radar wakes instantly from its low-power standby mode, delivering radar
coverage exactly when and where you want it. Even if your HALO20 radar
is completely powered down start-up is a matter of seconds, not minutes
like traditional pulse radar.
Easy to Use
Harbour,
offshore, weather and custom modes tune HALO20 Radar’s advanced signal
processing to help ensure that targets can be seen vividly – even in the
toughest environmental conditions.
Features:
- 10W Pulse Compression
- 24 nm range from a compact 20-inch dome
- Unrivalled short range
- Radiation safe
- Easy operation with harbour, offshore and weather mode
- MARPA target tracking
- InstantOn™
- Low Power Consumption
- Guard Zones
Included:
- 20" dome
- 10m cable (000-14548-001)
- Ethernet Adapter Cable (000-14552-001)
|
Click for larger image
|
|
Lowrance HALO20 20" Radar Dome w/5M Cable 1/24
LOWRANCE
HALO20 20" Radar Dome with 5M Cable
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
HALO20 20" Radar Dome with 5M Cable
Unrivalled Short-To-Mid-Range Performance
Extend
your view from the bow of your boat out to 24 nautical miles with
pulse-compression radar technology that not only delivers a powerful mix
of short and long-range detection, but provides precise target
definition with minimal clutter.
Better Situational Awareness, Collision Avoidance
HALO20
radar delivers a comprehensive range of features to enhance your
situational awareness and on-water safety. Monitor selected collision
hazards with MARPA target tracking, tracking up to 10 targets, or 20 in
dual range. Whether you’re navigating through crowded waterways or
contending with poor visibility, HALO20 radar cuts through the clutter
to give you a clear and current picture of your surroundings.
Ready Instantly
HALO20
Radar wakes instantly from its low-power standby mode, delivering radar
coverage exactly when and where you want it. Even if your HALO20 radar
is completely powered down start-up is a matter of seconds, not minutes
like traditional pulse radar.
Easy to Use
Harbour,
offshore, weather and custom modes tune HALO20 Radar’s advanced signal
processing to help ensure that targets can be seen vividly – even in the
toughest environmental conditions.
Features:
- 10W Pulse Compression
- 24 nm range from a compact 20-inch dome
- Unrivalled short range
- Radiation safe
- Easy operation with harbour, offshore and weather mode
- MARPA target tracking
- InstantOn™
- Low Power Consumption
- Guard Zones
Included:
- 20" dome
- 5m cable (000-14547-001)
- Ethernet Adapter Cable (000-14552-001)
Price: $1,899.00 - $2,198.95
|
Click for larger image
|
|
SI-TEX T-760 Compact Color Radar w/4kW 18" Dome - 7" Touchscreen 1/24
SI-TEX
T-760 Compact Color Radar with 4kW 18" Dome
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Big radar performance and features are available for any size boat -- and budget with the SI-TEX T-760. A vertically oriented, slim case boasts advanced touch screen technology and a host of professional features. Powerful 4kW output ensures superior target acquisition and tracking in the the most challenging conditions.
The T-760 Series case measures only 5.4" W X 8.9" H X 3.5" D. Yet, this system boasts a long list of professional-grade features, including powerful 4kW output, up to 24nm range, multi-speed antenna rotation, standard 50-target AIS tracking capability and standard 10-target MARPA - features often associated with larger, costlier systems. Control of all these features is achieved via the T-760's touch screen LCD display and single rotary encoder dial, for simple, intuitive operation.
The series includes the T-760, equipped with an 18-inch compact radome antenna for solid performance in a wide range of conditions and range scale choices from 1/8th nm to 24nm. Both the T-760 and T-761 feature powerful 4kW transmitters, ensuring accurate detection and presentation of targets large and small. Both models also offer multi-speed antenna rotation (16/27/36/48rpm) for optimum target detection and tracking over a range of boat speeds.
Among many other notable standard features of the T-760 Series are Relative Motion, True Motion, North-Up, Head-Up and Course-Up presentation modes, Auto or Manual Sea/Rain Clutter modes, 11 Trail Indication settings (including Off and Continuous), and more. With input from a SI-TEX Metadata AIS module (or other AIS receiver), the T-760 Series can track up to 50 AIS targets simultaneously for enhanced navigational safety in crowded waterways. With input of bearing, ship's speed and lat/lon data, the T-760 Series empowers navigators with professional MARPA tracking of up to 10 targets at distances up to 20nm.
In the SI-TEX tradition, the T-760 Series radar is ruggedly built to withstand harsh conditions at sea on commercial as well as recreational vessels. SI-TEX's two-year limited warranty and Long Island, New York-based service department are the navigator's assurance of reliable performance and long-term satisfaction
Features:
- 7" color LCD display
- 10M Cable
- Intuitive touch screen/rotary dial control
- Standard 50 target AIS tracking
- Standard 10 target MARPA
- Multi-speed (16-48 rpm) antenna rotation for optimum performance in real-world conditions
- Features include Relative Motion/True Motion/Head-Up/North-Up
- Optional color RGB video output
Quick Guide Owners Manual
RGB External Monitor Output Kit
The SI-TEX optional NQA-2447 kit is provided for the T-760 Series Radar. Through the additional interface, you can lead out the video signal to an external monitor. An additional external port is using a D-sub 15 pin connector. External monitor's display pixels are 800 x 400 dots (WVGA). Any operation on the radar is impossible through the external monitor. It is necessary that power supply to the external monitor separately.
Compatible Devices:
|
Price: $1,999.95 - $2,165.90
|
Click for larger image
|
|
HALO20+ 20" Radar Dome w/5M Cable -SIMRAD 1/24
SIMRAD
HALO20+ 20" Radar with 5M Cable
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
See Far And Near With One Compact Dome
Perfect
for a wide mid-sized to large sailboats, HALO20+ comes in a compact
20-inch dome antenna and delivers high-quality short, mid and long-range
detection. Monitor two distance ranges at once in Dual Range mode so
you can keep an eye on far away weather cells while watching for
collision hazards up close. HALO20+ radar’s pulse compression technology
means no compromises in detection at either selected range, while beam
sharpening provides enhanced separation between small or distant
targets.
The Best View To Avoid Collision
HALO20+
radar does a full 360 degree sweep every second, thanks to its
industry-first 60 RPM rotation at ranges up to 1.5 nautical miles. These
ultra-fast updates give you an almost real-time view at close range,
offering the ultimate view for collision avoidance of fast moving
targets.
Built-in VelocityTrack™ Doppler Technology
VelocityTrack™
technology grands instant visual feedback on whether targets are coming
towards you or moving away with colour-coding approaching vessels for
high visibility while de-emphasizing diverging targets, increasing
situational awareness and decreasing the risk of collision. HALO20+
radar automatically checks every target in range; there’s no need to
manually select individual targets, and no limit to the number of
targets on screen at one time.
Ready Whenever You Are
HALO20+
Radar wakes instantly from its low-power standby mode, delivering this
high-speed radar coverage exactly where and when you require it. Even if
your HALO20+ Radar is completely powered down, start-up only takes some
seconds, not minutes like traditional pulse radar.
Easy to Use Radar
Harbour,
offshore, weather and custom modes tune HALO20+ Radar’s advanced signal
processing to help ensure that targets can be seen vividly – even in
the toughest environmental conditions.
Features:
- 36 nm range from a compact 20-inch dome
- Advanced pulse compression technology with beam sharpening
- Simultaneous Dual Range operation sees both far and near
- Ultra-fast 60 RPM operation at ranges up to 1.5 nm
- VelocityTrack™ Doppler technology to avoid collision
- Easy operation with harbour, offshore, weather and custom modes
- MARPA target tracking (up to 10 targets, 20 in dual range)
- Ready instantly from standby
- Low power consumption
Included:
- 20" dome
- 5m cable (000-14547-001)
- Ethernet Adapter Cable (000-14552-001)
Price: $2,299.00 - $2,598.95
|
Click for larger image
|
|
Icom MR1010RII Marine Radar 4kW Color LCD 1/24
ICOM
MR1010RII Marine Radar 4kW Color LCD
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Commercial-grade radar with exclusive safety features.
Features:
- Maximum Range: 36NM with 4kW output
- Scanner Type: 2’ radome scanner
- Display Type: 10.4" color TFT LCD
Safety Features
Connect
the MR-1010RII to a DSC radio to use the DSC information function. When
connected to a DSC radio and a DSC call is received, the received
message is transferred to the MR-1010RII. Plot up to 20 DSC messages on
the radar echo. If Man Overboard (MOB) position information is
transmitted from a DSC handheld transceiver (i.e. M94D), the MR-1010RII
can show the MOB waypoint on the radar echo to assist in search and
rescue operation.
Connect the MR-1010RII to an external AIS device
to use the AIS overlay function. When connected (i.e. M605, M510 AIS,
and M506 AIS), up to 100 AIS target icons are overlaid on the radar
echo. By selecting an AIS icon, vessel information such as AIS class,
MMSI number, vessel name, course, speed, CPA, TCPA, bearing, and
distance are shown on the lower side of the display.
Large Color Display
The
MR-1010RII gives approximately a 176° viewing angle. The color RFT LCD
(480x640 dots) display offers bright vivid echos with 16 steps gradient
intensity. Easily adjust the screen color (day, night, and user
settings) with the "BRILL" button. In addition, the auto-hide
information function enlarges radar echoes to size.
Configure
various settings through the MR-1010RII’s visually intuitive operation.
The language setting is selectable from English, Indonesian, Korean,
Spanish, Thai, and Vietnamese. The large eight-direction cursor key
provides smooth operation even when wearing gloves.
Additional Features:
- Simplified ARPA function helps prevent collision risk with other vessels or objects
- TLL (Target Latitude Longitude) function
- True trail function
- 10.2-42V wide DC input to prevent over-voltage damage
- Two user-programmable alarm zones
- The optional video output unit
Specifications:
Display Unit:
- Display Type: 10.4-inch Color TFT LCD
- Resolution: 480 × 640 dots
- Type of emission: 16K0G3E (FM)
- Minimum range: 25 m; 82 ft (at 1?8 NM range)
- Maximum range: 36 NM
- Range
scales: NM 1/8, 1/4, 1?2, 3?4, 1, 1.5, 2, 3, 4, 6, 8, 12, 16, 24, 32,
36/km 1/4, 1?2, 3?4, 1, 1.5, 2, 3, 4, 6, 8, 12, 16, 24, 32, 36, 48
- Preheat time: 90 seconds
- Power supply: 10.2–42 V DC
- Power consumption (at zero wind velocity): 55 W (approximately)
- Usable temperature range: –15°C to +55°C; +5°F to +131°F
- Input data format: NMEA 0183®, N+1, AUX, IEC61162-2
- Output data format: NMEA 0183®
Scanner Unit:
- Type: 60 cm; 2 ft radome scanner
- Rotation speed: 24, 36 rpm typ.
- Horizontal beamwidth: 4° typ.
- Vertical beamwidth: 22° typ.
- Sidelobe: –22 dB typ.
- Usable temperature range: –25°C to +70°C; –13°F to +158°F
- Usable humidity range: Less than 95% (at 40°C; +104°F)
- Frequency: 9410 MHz ±30 MHz
- Modulation: P0N
- Peak output power: 4 kW
- Pulse-width/repetition rate: 80 ns/2160 Hz, 80 ns/1440 Hz, 250 ns/1440 Hz, 350 ns/1440 Hz, 350 ns/720 Hz, 900 ns/720 Hz
- Modulator: FET switching
- Intermediate frequency: 60 MHz
- IF bandwidth: 10 MHz, 3 MHz
- Tuning: Auto/manual selectable
- Supplied system cable: 15 m; 49.2 ft; OPC-2341
|
Click for larger image
|
|
MARINE RADAR -SI-TEX NAV PRO W/MDS-12 WIFI 24" HI RESOLUTION DIGITAL RADOME W/15 CABLE. 9" TOUCH SCREEN. 1/24
SITEX
NavPro 900 with MDS-12 WiFi 24" Hi-Res Digital Radome Radar with 15M Cable
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
9" Touch Screen GPS/Chart Plotter w/Wifi, Includes C-Map, all Accessory Cables & Internal GPS Receiver/Antenna
These
powerful MFDs give fishermen, sailors and cruisers everything they need
to navigate, catch fish and safely enjoy their time on the water,
Hybrid Touch Control lets boaters operate the system using the large
touchscreen display or a combination of robust hard keys,
four-directional pad or rotary knob. WI-FI and Bluetooth connectivity
make it easy to manage importanta data and software updates, allow for
mulitple display options and remote control of NavPro Series MFDs using a
smartphone or tablet.
Features:
- Bright, high-resolution LCD displays
- Compatible with advanced C-map 4D cartography
- Control the way you want, with advanced touchscreen or robust keys
- Offered with intergrated or Black Box CHIRP sonar
- Availabe in 46-65kHz, 100-140kHz or 160kHz-200kHz CHIRP
- Easy software updating over the Internet - no PC or app needed
- Mirror Control second display and remote control via NavPro app
- Automatic storage and synchronization of important data using Captain Cloud
- Backed by SI-TEX's 2 Year Warranty and U.S. based customer service
Precision
navigation, powerful CHIRP sonar options and advanced connectivity and
control-what more could today's modern boater want?!
4kW Hi-Res 24" Digital Radome Radar with Internal WiFi Module & 15M Cable for All NavPro Units
Features:
- Adjustable VRM and EBL function provides precise range and bearing information to any target displayed
- Target
intensity is shown in color shades to assist the operator in
differentiating between large and small vessels and weather severity
- Other
features include interference rejection caused by other radars
operating nearby, FTC to reduce Rain Clutter and STC to pick out targets
hidden by high seas and spray
- 24" 4kW Hi-Res Radome Radar
- Includes Internal WiFi Module
- Specifically made for SI-TEX NavPro Units
|
Click for larger image
|
|
MARINE RADAR SI-TEX NavPro 900F with MDS-12 WIFI 24" HIGH RESOLUTION RADOME W 15 CABLE 1/24
SI-TEX
NavPro 900F with MDS-12 WiFi 24" Hi-Res Digital Radome Radar with 15M Cable
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
9"
Touch Screen GPS/Chart Plotter w/built-in CHIRP Sounder, Includes C-MAP
4D Card, Wifi, all Accessory Cables & Internal GPS Receiver/Antenna
These
powerful MFDs give fishermen, sailors and cruisers everything they need
to navigate, catch fish and safely enjoy their time on the water,
Hybrid Touch Control lets boaters operate the system using the large
touchscreen display or a combination of robust hard keys,
four-directional pad or rotary knob. WI-FI and Bluetooth connectivity
make it easy to manage importanta data and software updates, allow for
mulitple display options and remote control of NavPro Series MFDs using a
smartphone or tablet.
Features:
- Bright, high-resolution LCD displays
- Compatible with advanced C-map 4D cartography
- Control the way you want, with advanced touchscreen or robust keys
- Offered with intergrated or Black Box CHIRP sonar
- Availabe in 46-65kHz, 100-140kHz or 160kHz-200kHz CHIRP
- Easy software updating over the Internet - no PC or app needed
- Mirror Control second display and remote control via NavPro app
- Automatic storage and synchronization of important data using Captain Cloud
- Backed by SI-TEX's 2 Year Warranty and U.S. based customer service
Precision
navigation, powerful CHIRP sonar options and advanced connectivity and
control-what more could today's modern boater want?
4kW Hi-Res 24" Digital Radome Radar with Internal WiFi Module & 15M Cable for All NavPro Units
Features:
- Adjustable VRM and EBL function provides precise range and bearing information to any target displayed
- Target
intensity is shown in color shades to assist the operator in
differentiating between large and small vessels and weather severity
- Other
features include interference rejection caused by other radars
operating nearby, FTC to reduce Rain Clutter and STC to pick out targets
hidden by high seas and spray
- 24" 4kW Hi-Res Radome Radar
- Includes Internal WiFi Module
- Specifically made for SI-TEX NavPro Units
|
Click for larger image
|
|
|
|
|