|  | 
  
    | ROCK TAMERS HD Stainless Steel Heat Shield  1/24 ROCK TAMERS
 
 
HD Stainless Steel Heat Shield   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS  
 Rock Tamers
RT231 Heat Shield is an add-on mudflap accessory item that protects your
mudflap from high exhaust temperatures.  Allows for closer installation
of the Rock Tamers Mudflap System to your tailpipe(s) by providing a
heat disbursement for hot exhaust gases.  Features: 
    Straight forward installation and versatile positioning allows for customization to your specific requirementsCan be mounted anywhere on your mudflapIncludes "TOP HAT" design ceramic washers to protect the mudflapMade of 1.0 mm thick stainless steelStylish Rock Tamers design works hard and looks great In the Box: 
    1 Heat Shield4 M6 Star Pin Steel Bolts4 Ceramic Washers8 M6 Steel Washers4 M6 Steel/Nylon Nuts1 Steel Wrench *Sold as an Individual
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | MFG Trim Plate - Choose MFG - CHEVY, GMC, and RAM    Stainless Steel  (pair) 1/24 ROCK TAMERS
 
 
  SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 Rock Tamers RT310 Chevrolet, RT320 GMC, RT330 RAM with stainless steel trim plates are an add-on mudflap accessory item. Features: 
    Stainless Steel Made in the U.S.A *Sold as a Pair
 
 |  Click for larger image
 
 
   
 | 
  | 
 | 
  
    | REPLACEMENT MUDFLAPS - ROCK TAMERS 1/24 ROCK TAMERS
 
 
Replacement Mudflap   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 Replacement mudflap for your existing ROCK TAMERS Mudflap System. Compatibility: 
    00108 Mudflap System - 2" Hub00110 Mudflap System - 2.5" Hub00112 Mudflap System - 3" Hub Features: 
    Mudflap can be used for both left and right sidesMudflap is 3/8" thick, fiber reinforced rubberRock Tamers trim plate is sold separately, part RT028Mudflap measures 24" x 24" *Sold as an Individual 
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | Transom Ratchet Tie Down - 2" x 43" - 2-Pack  - FULTON 1/24 FULTON
 
 
Transom Ratchet Tie Down - 2" x 43" - 2-Pack   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 Features: 
    833lbs Load Capacity2,500lbs Break StrengthZincStrap retracts for easy storage and no tanglingEasy bolt on function (Hardware included)Some models available with stainless steel housingVinyl coated J-hooks protect boats finishProvides super strong holding powerSome models available with stainless steel housing  WARNING:
This product can expose you to chemicals including Chromium (hexavalent
compounds) which is known to the State of California to cause cancer,
birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | Single Speed Winch - Strap Not Included  - 1800LB FULTON 1/24 FULTON
 
 
1800lb Single Speed Winch - Strap Not Included   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 Winch, 1800lbs, Single-Speed We
manufacture a full line of Fulton brand single speed winches designed
to meet your toughest pulling demands. Our winches feature efficient
gear ratios, full-length drum bearings, oil-impregnated shaft bushings,
and our "Comfort Grip" handle for ease of cranking. All gears are
high-carbon steel for superb strength and long-term durability. Stamped
carbon steel frames provide rigidity for gear alignment and longer cycle
life. Zinc finishes provide excellent corrosion resistance in all
environments. All models are designed for use with rope or strap. Specs: 
    Capacity (lbs.): 1,800Handle Length: 8"Gear Ratio: 4.1:1Rope: 20' x 7/16" (Not Included)Strap: 20' x 2" (Not Included)Strap Included: No  WARNING:
This product can expose you to chemicals including Chromium (hexavalent
compounds) which is known to the State of California to cause cancer,
birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | 1500lb Single Speed Winch w/20' Strap Included - Black Cover - FULTON 1/24 FULTON
 
 
 
1500lb Single Speed Winch w/20' Strap Included - Black Cover   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 Single Speed Trailer Winches We
manufacture a full line of Fulton brand single speed winches designed
to meet your toughest pulling demands. Our winches feature efficient
gear ratios, full-length drum bearings, oil-impregnated shaft bushings,
and or "Comfort Grip" handle of ease of cranking. All gears are
high-carbon steel for superb strength and long-term durability. Stamped
carbon steel frames provide rigidity for gear alignment and longer cycle
life. Zinc finishes provide excellent corrosion resistance in all
environments.  Specs Capacity: 1,500 lbs. Gear Ratio: 4.1:1 Handle Length: 8" Ratchet Type: Two-Way Drum Storage (Rope): N/A Drum Storage (Strap): 20' x 2" Strap Included: Yes  WARNING:
This product can expose you to chemicals including Chromium (hexavalent
compounds) which is known to the State of California to cause cancer,
birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | Fold-Away Bolt-On Hinge Kit 2" x 3" Trailer Beam, Rating 5,000 lbs., 48" Pivot, 1/24 FULTON
 
 
 
   Fold-Away Bolt-On Hinge Kit  
 Kit 2" x 3" Trailer Beam, Rating 5,000 lbs., 48" Pivot, Z-Max 600 Zinc Finish SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
 Features:
 
    Hinge Kit
2" x 3" Trailer Beam
Z-Max 600 Zinc Finish
Raing 5,000 lbs.
48" Pivot
Limited 5-Year Warranty 
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | 1800lb Single Speed Winch w/20' Strap Included - Black Cover FULTON 1/24 FULTON
 
 
1800lb Single Speed Winch w/20' Strap Included - Black Cover   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 Single Speed Trailer Winches We
manufacture a full line of Fulton brand single speed winches designed
to meet your toughest pulling demands. Our winches feature efficient
gear ratios, full-length drum bearings, oil-impregnated shaft bushings,
and or "Comfort Grip" handle of ease of cranking. All gears are
high-carbon steel for superb strength and long-term durability. Stamped
carbon steel frames provide rigidity for gear alignment and longer cycle
life. Zinc finishes provide excellent corrosion resistance in all
environments.  Specs Capacity: 1,800 lbs. Gear Ratio: 4.0:1 Handle Length: 8" Ratchet Type: Two-Way Drum Storage (Rope): N/A Drum Storage (Strap): 20' x 2" Strap Included: Yes  WARNING:
This product can expose you to chemicals including Chromium (hexavalent
compounds) which is known to the State of California to cause cancer,
birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | Boat Trailer roller Style Boat Guide-On -C.E. Smith 1/24 C.E. Smith
 
 
 
 Roller Style Boat Guide-On   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 These smooth
rolling guides assist in centering the boat onto the trailer.  Ideal for
retrieving your boat on shallow ramps where the trailer is not far into
the water when you are alone or have a crosswind or current pushing the
boat.
 
 Features:
 
 
    21"H Galvanized posts extend up to 13" out from edge of trailer frame
Mounting hardware included for frames up to 3"W x 4 1/4"H   
Sold in pairs
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | 2-Speed Winch - Strap Not Included 2000LB FULTON 1/24 FULTON
 
 
 
2000lb 2-Speed Winch - Strap Not Included  SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 Features 
    Make
    light work of heavy load with Fulton brand two-speed winches.  One fast
    speed for quick pull-in, a seconds low speed for increased mechanical
    advantage.Our shift lock design allows changing gears without
    moving the crank handle from shaft to shaft.  Just lift the shift lock
    and slide the shaft into the desired gear position.  Shift lock holds
    the shaft in gear.Neutral, free-wheel position allows quick line pay out without spinning the handle.5 year limited warranty Specs: 
    Capacity (lbs.): 2,000Handle Length: 10"Gear Ratio: 4.1:1 & 9.8:1Strap: 20' x 2"Hub Size: 1"Hand Brake: optionalStrap Included: Yes  WARNING:
This product can expose you to chemicals including BISPHENOL A (BPA)
which is known to the State of California to
 cause birth defects or
other reproductive harm. For more information go to P65Warnings.ca.gov.
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | Fulton 1500 lbs. Swing Away Bolt on Single Wheel Jack  1/24 FULTON
 
 
 
 Fulton 1500 lbs. Swing Away Bolt on Single Wheel Jack SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
 Fulton Bolt Thru Swivel Jacks feature swing-away design,
with bolt thru mounting. Heavy duty steel construction with a zinc
finish for corrosion resistance. 12" of travel with 8" poly wheel.  WARNING:
This product can expose you to chemicals including Chromium (hexavalent
compounds) which is known to the State of California to cause cancer,
birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
   
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | 2500 lbs. Square Tube Fixed Mount Jack No Wheel  1/24 FULTON
 
 
  
2500 lbs. Square Tube Fixed Mount Jack - No Wheel   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS  
 
    Fixed mount trailer jack
 Heavy duty zinc
 Drop leg
 Pull pin diameter: 9/16"
 Lift capacity: 2500 lbs
 Measurements:
 Retracted: 7"Extended: 35.5"
 Clearance Height: 19"
  WARNING:
        This product can expose you to chemicals including Chromium (hexavalent
        compounds) which is known to the State of California to cause cancer,
        birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
    
     
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | Single Wheel 1,500 lbs. Bolt-Thru Swivel Jack - FULTON  1/24 FULTON
 
 
 
 Marine and Recreational Jack   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 Handle Style: SidewindRetracted: 12.75"
 Extended: 22.75"
 Clearance: 12.5"
 Description: Zinc with 8" diameter caster
 Pull Pin Diameter: 1/2"
 
 Designed
for use with marine and utility trailers. Fulton brand tongue jacks are
time-tested and application-proven. Our bolt-on versions include all
necessary mounting hardware. The Fulton brand bolt-thru swivel mounts
use 3-D formed heavy-gauge steel stampings and proprietary bushing
material for a mount with minimal deflection and maximum support. All
mounts fit up to a 3" x 5" trailer frame.
 
 
    Extensive choice of popular models
Strong proprietary bushing materials
Stable formed heavy-gauge steel construction
Dependable design  WARNING:
This product can expose you to chemicals including Chromium (hexavalent
compounds) which is known to the State of California to cause cancer,
birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
    
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | TRAILER GUIDE ON KIT - 60" Post Guide-On w/I-Beam Mounting Kit
C.E. SMITH 1/24 C.E. Smith
 
 
 
 60" Post Guide-On w/I-Beam Mounting Kit   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 Product Description
 These
Post Guide-Ons allow you to see the location of your trailer when it's
under water. Designed for I-beam trailers and I-beam boat lifts, these
guide-ons feature an innovative two-piece mounting clamp that works
above or below the I-beam.  Brackets will fit onto any height and
virtually any width I-beam trailer frame.
 
 Features:
 
 
    Mounting hardware included
Sold in pairs
Adjusts out to 19" each side
1-1/2" square. 16 gauge pre-galvanized steel uprights
 2-3/8" diameter white PVC posts
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | Fold-Away Bolt-On Hinge Kit 3" x 3" Trailer Beam - FULTON 1/24 FULTON
 
 
 
Fulton Fold-Away Bolt-On Hinge Kit 3" x 3" Trailer Beam, Rating 5,000 lbs., 48" Pivot, Z-Max 600 Zinc Finish SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 Features:
 
    Hinge Kit
3" x 3" Trailer Beam
Z-Max 600 Zinc Finish
Rating 5,000 lbs.
48" Pivot
Limited 5-Year Warranty  WARNING:
This product can expose you to chemicals including BISPHENOL A (BPA)
which is known to the State of California to cause birth defects or
other reproductive harm. For more information go to P65Warnings.ca.gov.
   
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | BOAT TRAILER Guide On Kit - 44" - Pair FULTON 1/24 FULTON
 
 Boat Guide On Kit - 44" - Pair   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 Features: 
    Boat guides help you visually guide your boat on your trailerHigh-strength super gripper mounting brackets attach firmly above and below the trailer frameEasy bolt-on mounting fits trailer frames up to 3" x 5" highAdjustable to provide optimum fit to any hull designUpright Height 44"  WARNING:
This product can expose you to chemicals including BISPHENOL A (BPA)
which is known to the State of California to cause birth defects or
other reproductive harm. For more information go to P65Warnings.ca.gov.
 
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | Boat Trailer Guide On Kit - 50" - Pair  FULTON 1/24 FULTON
 
 
 
Boat Guide On Kit - 50" - Pair   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 Boat
guides help you visually guide your boat onto your trailer.  High -
strength super gripper mounting brackets attach firmly above and below
the trailer frame.  Easy bolt-on mounting fits trailer frames up to 3" x
5" high.  Adjustable to provide optimum fit to any hull design.  WARNING:
This product can expose you to chemicals including BISPHENOL A (BPA)
which is known to the State of California to cause birth defects or
other reproductive harm. For more information go to P65Warnings.ca.gov.
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | 2600LB 2 SPEED WINCH w/HAND BRAKE- FULTON 1/24 FULTON
 
 
 2600lb 2-Speed Winch with Hand Brake   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS  
 Winch, 2600 lbs., 2-Speed with Brake Features 
    Make
    light work of heavy load with Fulton brand two-speed winches.  One fast
    speed for quick pull-in, a seconds low speed for increased mechanical
    advantage.Our shift lock design allows changing gears without
    moving the crank handle from shaft to shaft.  Just lift the shift lock
    and slide the shaft into the desired gear position.  Shift lock holds
    the shaft in gear.Neutral, free-wheel position allows quick line pay out without spinning the handle.5 year limited warranty Specs: 
    Capacity (lbs.): 2,600Handle Length: 10"Gear Ratio: 5.1:1 & 12.2:1Strap: 20' x 3" (Not Included)Hub Size: 1"Hand Brake: IncludedStrap Included: No  WARNING:
This product can expose you to chemicals including Chromium (hexavalent
compounds) which is known to the State of California to cause cancer,
birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | 1,500 lbs. Bolt-Thru Swivel Jack  Fulton Dual Wheel 1/24 FULTON
 
 
   Marine and Recreational Jack   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS Handle Style: Sidewind
 Retracted: 12.75"
 Extended: 24.75"
 Clearance: 12.5"
 Description: Zinc with 6" diameter caster, dual wheel
 Pull Pin Diameter: 1/2"
 
 Designed
for use with marine and utility trailers. Fulton brand tongue jacks are
time-tested and application-proven. Our bolt-on versions include all
necessary mounting hardware. The Fulton brand bolt-thru swivel mounts
use 3-D formed heavy-gauge steel stampings and proprietary bushing
material for a mount with minimal deflection and maximum support. All
mounts fit up to a 3" x 5" trailer frame.
 
 
    Extensive choice of popular models
Strong proprietary bushing materials
Stable formed heavy-gauge steel construction
Dependable design  WARNING:
This product can expose you to chemicals including BISPHENOL A (BPA)
which is known to the State of California to cause birth defects or
other reproductive harm. For more information go to P65Warnings.ca.gov.
  
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | 2-Speed Winch w/20' Strap Fulton 2600lb   1/24 FULTON
 
 
2600lb 2-Speed Winch with 20' Strap SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
 Features 
    Make
    light work of heavy load with Fulton brand two-speed winches.  One fast
    speed for quick pull-in, a seconds low speed for increased mechanical
    advantage.Our shift lock design allows changing gears without
    moving the crank handle from shaft to shaft.  Just lift the shift lock
    and slide the shaft into the desired gear position.  Shift lock holds
    the shaft in gear.Neutral, free-wheel position allows quick line pay out without spinning the handle.5 year limited warranty Specs: 
    Capacity (lbs.): 2,600Handle Length: 10"Gear Ratio: 5.1:1 & 12.2:1Strap: 20' x 2"Hub Size: 1"Hand Brake: optionalStrap Included: Yes  WARNING:
This product can expose you to chemicals including Chromium (hexavalent
compounds) which is known to the State of California to cause cancer,
birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | Trailer Winch 2,000 lbs. w/Strap  Fulton F2 1/24 FULTON
 
 
F2 Trailer Winch   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 Fulton's trailer winch
continues the industry-changing improvements in both performance and
style of the Fulton F2 Series of Products Stylish Design The
introduction of the F2 Winch addresses the need for attractive design
in every element of a marine trailer. This winch will complement the
look of even high end boat and trailer combinations. It's clean,
high-tech look is sleek and powerful Maintenance Free Designed
to eliminate the need for lubrication or maintenance, the F2 Winch's
components are precision fit to eliminate the need for tightening or
replacement. Corrosion-resistant coatings cover internal and external
components so they will hold up in salt water and other harsh
environments Rigorously Tested Misuse and
abuse are common to all products used in the great outdoors. Our design
team tested every aspect of the F2 Winch's Performance and exposed it to
the harshest working environments we could think of. The superior
materials and coatings held up every time, allowing us to offer an
unprecedented limited lifetime warranty Erogonomic Design Featuring
a "soft touch," adjustable-length handle and ergonomic function, we've
worked hard to ensure that every moving part will operate smoothly and
with the least amount of effort Strong. Durable Construction The F2 Winch has been tested far beyond its rated capacity for superior performance Adjustability Handle
adjusts from 6" - 9," balances torque, speed, and clearance. Switches
from left to right handed drive configuration with ease. Specs: 
    Capacity (lbs.): 2,000Gear Ratio: 5.1:1Strap: 20' x 2"Strap Included: Yes  WARNING:
This product can expose you to chemicals including Chromium (hexavalent
compounds) which is known to the State of California to cause cancer,
birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | Boat Trailer Roller Guide Kit - Pair -  FULTON 1/24 FULTON
 
 
 
Boat Trailer Roller Guide Kit - Pair   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 Features: 
    Boat guides help you visually guide your boat onto your trailerHigh-strength super gripper mounting brackets attach firmly above and below the trailer frameEasy bolt-on mounting fits trailer frames up to 3" x 5" high Adjustable to provide optimum fit to any hull design  WARNING: This product can expose you to chemicals
including BISPHENOL A (BPA) which is known to the State of California to
cause birth defects or other reproductive harm. For more information go
to P65Warnings.ca.gov.
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | Boat Trailer 5 ft bunk board Guide On kit   C.E. Smith  1/24 C.E. SMITH
 
 
 
 5ft  Bunk Board Guide-On   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 
 Product DescriptionCarpeted bunk boards provide proper center loading even in wind or side current conditions.
 
 
 
    1-1/2" square pre-galvanized uprights, angled out at 75°
2" x 4" x 60" boards tilt to hug the hull and are covered with high grade marine carpet
Boards are untreated Southern yellow pine  
Height of 21" with adjustment out to 13" from frame on each side
Can be mounted on top of frame for extra height  
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | 2 SPEED WINCH (CABLE NOT INCLUDED) 3200LB FULTON 1/24 FULTON
 
 
3200lb 2-Speed Winch - Cable Not Included   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 Features 
    Make
    light work of heavy load with Fulton brand two-speed winches.  One fast
    speed for quick pull-in, a seconds low speed for increased mechanical
    advantage.Our shift lock design allows changing gears without
    moving the crank handle from shaft to shaft.  Just lift the shift lock
    and slide the shaft into the desired gear position.  Shift lock holds
    the shaft in gear.Neutral, free-wheel position allows quick line pay out without spinning the handle.5 year limited warranty Specs: 
    Capacity (lbs.): 3,200Handle Length: 10"Gear Ratio: 5.1:1 & 12.2:1Cable: 100' x 7/32" (Not Included)Hub Size: 1-3/4"Hand Brake: optionalCable Included: No  WARNING:
This product can expose you to chemicals including Chromium (hexavalent
compounds) which is known to the State of California to cause cancer,
birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | Fold-Away Bolt-On Hinge Kit 3" x 5" Trailer Beam Rating 9,000 lbs., 48" Pivot,  FULTON - 1/24 FULTON
 
 
 Fulton Fold-Away Bolt-On Hinge Kit 3" x 5" Trailer Beam, Rating 9,000 lbs., 48" Pivot, Z-Max 600 Zinc Finish   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 
 Features:
 
 
    Hinge Kit
3" x 5" Trailer Beam
Z-Max 600 Zinc Finish
Rating 9,000 lbs.
48" Pivot
Limited 5-Year Warranty  WARNING:
This product can expose you to chemicals including BISPHENOL A (BPA)
which is known to the State of California to cause birth defects or
other reproductive harm. For more information go to P65Warnings.ca.gov.
  
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | Boat Trailer Guide-On w/Unlighted Posts f/U-Bolt Mounting 75"   1/24 C.E. SMITH
 
 
 
 75" Post Guide-On w/Unlighted Posts f/U-Bolt Mounting 
 SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
   Product DescriptionThese
Post Guide-Ons allow you to see the location of your trailer when it's
under water. The 2" PVC tubes make it easy to see your trailer's
position when backing down the ramp.
 
 Features:
 
 
    Mounting hardware included 
Sold in pairs
Adjusts out to 19" each side
Fits frames up to 3" W x 5-1/4" H
1-1/2" square, 16 gauge pre-galvanized steel uprights
2-3/8" diameter white PVC posts
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | 5000 lbs. Square Tube Fixed Mount Jack - No Wheel FULTON 1/24 FULTON
 
 
 Fulton 5000 lbs. Square Tube Fixed Mount Jack No Wheel SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
    
Fixed mount lift
 
 
     Lift capacity: 5,000 lbs
 Sidewind handle
 Zinc, heavy-duty with drop leg
 Measurements: 
  Retracted: 6.5"Extended: 24.75"
 Clearance: 18.5"
  WARNING:
        This product can expose you to chemicals including Chromium (hexavalent
        compounds) which is known to the State of California to cause cancer,
        birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
    
    
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | Wide Track Jack Bolt-On 1,600 lbs. FULTON F2 1/24 FULTON
 
 
 
 F2 Wide Track Jack   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 Includes Handle Hold-Up & Wheel Wedge Features, & Bolt-On Mounting Hardware for 3" x 3" & 3" x 4" Frames
 
 Fulton's
F2 is designed for use with marine, recreational and utility trailers,
continues that Fulton heritage of innovation rethinking every feature
and challenging industry conventions.  The result is a reengineered high
quality product that will transform the industry.  It's so strong and
reliable that Fulton is backing it with an unprecedented Limited
Lifetime Warranty.
 
 Features:
 
 
    Maintenance free - designed to eliminate the need for lubrication and maintenance.
Corrosion resistant coatings cover internal and external components - will hold up in salt water and other harsh environments.
Ergonomic design - crank, release pin and integrated wheel wedge are made of strong, engineered plastic for a comfortable touch.
Stylish design - compliment your boat and customize your trailer's styling.
Sealed and lubricated one-piece gearbox.  WARNING:
This product can expose you to chemicals including Chromium (hexavalent
compounds) which is known to the State of California to cause cancer,
birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
  
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | Load Rite 9.6" Dexter Vented Rotor Disc Brake Kit 1/24 LOAD RITE
 
 
 Load Rite 9.6" Dexter Vented Rotor Disc Brake Kit SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
   Load
Rite's 5-lug, 9.6-inch vented rotor disc brake kit is manufactured by
Dexter and fits a standard 3,750 lbs capacity spindle. Kit Includes: 
    Vented rotor with Galvx finishAluminum caliper with e-coat finishCeramic pads with backing platesGalvanized heavy-duty mounting bracketDust cap, slider pins, and hardwarePre-greased rotors include bearings, races, and seals *Quantity (2) Kits Required Per Axle Assembly   
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | Trailer Winch 3,200 lbs. - 2-Speed w/Strap  FULTON  1/24 FULTON
 
 
 
 F2 Trailer Winch   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 Fulton's 3,200 lbs. capacity
winch will complement the look of even high end boat and trailer
combinations and continues the industry-changing improvements in both
performance and style of the Fulton F2 series of products. Its clean,
high-tech look is sleek and powerful.
 
 Features:
 
 
    Completely enclosed stylish design - compliment your boat and customize your trailer's styling 
Precision fit components eliminate tightening or replacement 
Maintenance free - designed to eliminate the need for lubrication or maintenance 
Corrosion-resistant coating resists damage from moisture and salt 
Corrosion-resistant one-piece aluminum frame and one-piece aluminum handle
Operates smoothly with reliable solid drive gear and powerful dual gear drum 
Center drive enclosed ratchet system 
User-friendly pull-turn knob to engage ratchet plunger pin 
Adjustable-length soft grip handle, switches from left- to right-hand drive configuration 
3200 lbs. capacity 
Includes 21' strap with hook 
Standard mounting bolt pattern, mounting hardware included (footprint 8"Hx6.5"Wx9.5"D) 
Features E.I.S. - Easy Install System 
CE Compliant 
LIMITED LIFETIME WARRANTY 
 Specs:
 
 
     Capacity: 3,200 lbs.
 Warranty: Limited Lifetime
 Speed: 2
 Weight Carrying: 3200 lbs
 Strap Included: Yes  WARNING:
This product can expose you to chemicals including Chromium (hexavalent
compounds) which is known to the State of California to cause cancer,
birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
  
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | Load Rite 6,600lb Disc Brake Actuator – Tie Down Engineering Model 1/24 LOAD-RITE
 
 
6,600lb Disc Brake Actuator – Tie Down Engineering Model 
  SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 The
Model 660E works by the “surge” or “push” of the trailer toward the tow
vehicle. This automatically synchronizes the trailer brakes with the
tow vehicle axle brakes. When the trailer pushes against the tow
vehicle, the actuator telescopes together and applies the force to the
master cylinder, supplying hydraulic pressure to the brakes. The
built-in dampening shock absorber retards the telescoping shock against
the hitch ball. Be sure to comply with the regulations for brakes in
your state. Brake laws are sometimes minimum standards, and you may wish
to add additional brakes to a trailer. Read the tow vehicle's
owner’s manual on towing capacity and other towing recommendations
before installing brakes or this actuator. The Model 660E Actuator is
completely assembled and ready to bolt into place, if not already
installed. Manufactured for tongue sizes: 3”x 3”, 3”x 4” & 3”x 5”. Features: 
    6,600 lbs. capacityFits 2? in. hitch ballFor use with disc brakes Maximum Actuator Capacity: 
    Gross Load: 6,600 lbs.Maximum Tongue Load: 650 lbs. The
actual in-service rating is limited to that of the ball and hitch or
the least-rated component on the tow vehicle or trailer being used, or
the trailer manufacturer’s G.V.W.R. shown on the certification label,
whichever is lower (note: G.V.W.R. is the Gross Vehicle Weight Rating,
which includes the trailer and the load weight as a total gross weight). 
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | Load Rite 12" Dexter Vented Rotor Disc Brake Kit 1/24 LOAD RITE
 
 
12" Dexter Vented Rotor Disc Brake Kit   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 Load Rite's 6-lug, 12-inch vented rotor disc brake kit is manufactured by Dexter and fits a standard 3,000-capacity spindle. Kit Includes: 
    Vented rotor with Galvx finishAluminum caliper with e-coat finishCeramic pads with backing platesGalvanized heavy-duty mounting bracketDust cap, slider pins, and hardwarePre-greased rotors include bearings, races, and seals *Quantity (2) Kits Required Per Axle Assembly
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | Load Rite 10" AutoFlex Knott Disc Brake Kit 1/24 
 
 10? Knott Disc Brake Kit   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 Load Rite's 5-lug,
10-inch vented integral rotor disc brake kit is manufactured by AutoFlex
KNOTT and fits KNOTT 3,700 lbs. capacity 5-bolt axles. Kit Includes: 
    Vented cupped and studded, zinc rotor, and hub assemblyLoaded caliper assembly with padsFull inner and outer bearings, races, and corresponding sealDust cap, lug nuts, and mounting hardware *LH/RH Compatible *Quantity (2) Kits Required Per Axle Assembly   
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | Trailer Jack Bolt-On 2,000 lbs. Lift Capacity Adjustable Swivel w/Footplate  FULTON F2  1/24 FULTON
 
 
 
 F2 Trailer Jack Bolt-On 2,000 lbs.   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 Fulton's
2,000 lbs. Lift Capacity Adjustable Swivel with Footplate Jacks pack all
of the features of the award winning Twin Track & Wide Track
models, along with unprecedented Limited Lifetime Warranty. The 2,000
lbs. Capacity Jacks posess the following features.
 
 Features:
 
 
    Heavy
    Duty Articulating Footplate - 7" diameter cast footplate provides
    superior stability. Unique ball and socket connection between jack and
    footplate allows for whatever articulation is required to accommodate
    uneven surfaces
13" of swivel mount height adjustment  WARNING:
This product can expose you to chemicals including BISPHENOL A (BPA)
which is known to the State of California to cause birth defects or
other reproductive harm. For more information go to P65Warnings.ca.gov.
  LITERATURE:
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | Load Rite 12" AutoFlex Knott Disc Brake Kit  1/24 LOAD RITE
 
 
12" AutoFlex Knott Disc Brake Kit   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 Load Rite's
6-lug, 12-inch vented rotor disc brake kit is manufactured by AutoFlex
KNOTT and fits UFP 6,000 lbs. capacity 6-bolt axles. Does not fit Tie
Down. Kit Includes: 
    Vented cupped and studded, zinc rotor, and hub assemblyLoaded caliper assembly with padsFull inner and outer bearings, races, and corresponding sealDust cap, lug nuts, and mounting hardware *LH/RH Compatible *Quantity (2) Kits Required Per Axle Assembly 
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | Track Jack Bolt-On 1,600 lbs -Fulton F2 Twin 1/24 FULTON
 
 
 
 F2 Twin Track Jack   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 Includes Handle Hold-Up & Wheel Wedge Features, & Bolt-On Mounting Hardware for 3" x 3" & 3" x 4" Frames
 
 Fulton's
F2 is designed for use with marine, recreational and utility trailers,
continues that Fulton heritage of innovation rethinking every feature
and challenging industry conventions.  The result is a reengineered high
quality product that will transform the industry.  It's so strong and
reliable that Fulton is backing it with an unprecedented Limited
Lifetime Warranty.
 
 
 
    Maintenance free - designed to eliminate the need for lubrication and maintenance.
Corrosion resistant coatings cover internal and external components - will hold up in salt water and other harsh environments.
Ergonomic design - crank, release pin and integrated wheel wedge are made of strong, engineered plastic for a comfortable touch.
Stylish design - compliment your boat and customize your trailer's styling.
Sealed and lubricated one-piece gearbox.  WARNING:
This product can expose you to chemicals including Chromium (hexavalent
compounds) which is known to the State of California to cause cancer,
birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov 
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | Mudflap System - Matte Black/Stainless -ROCK TAMERS 2.5" Hub  1/24 ROCK TAMERS
 
 
2.5" Hub Mudflap System - Matte Black/Stainless   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 ROCK
TAMERS™ is the premiere “Adjustable and Removable” Mudflap System
designed to provide the ultimate protection for your towables from
damage caused by rocks and road debris. Perfect solution for
consumers who want the utility aspect of mudflaps and to maintain their
vehicle’s stylish and attractive appearance. *This patented system is easy to attach or remove from any standard 2.5" ball mount Features: 
    Mudflap height is adjustable to maintain consistent ground clearance when towing various loadsOverall width is adjustable and easily fine-tuned to fit any small, full size, or dually truckWidth expands from 67 3/4" to 97 1/4"Mudflap measures 24" x 24" In the Box: 
    2.5" Center Hub/Matte Black FinishM10 Ball Mount Clamp Bolt x 2M10 Jam Nut x 2M10 Split Washer and M10 Flat Washer x 2Hub Arm R (Right)  and Hub Arm L (Left) x 1M6 Arm Clamp Bolt x 6M6 Nylon Insert Hex Nut x 6M18 Arm Pivot Bolt/Split Washer/Flat Washer x 25MM Allen Wrench x 1Flap Support Rod x 2Rod End Cap and Flap End Cap x 2M5 Flap Retainer and End Cap Bolt x 2M5 Nylon Insert Hex Nut x 4Flap Clamp / Matte Black Finish x 2Mudflap (SS Trim Plate) x 2M8 Flap Clamp Bolt/Flat Washer/Hex Nut x 10Bolt Hole Punch x 1Rock Tamers Trim Plate x 2M6 Trim Plate Bolt/Spacer/Washer/Hex Nut x 16Locking STAR PIN™ Wrench x 1Instruction Manual  x 1 *Sold as a Kit   
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | Mudflap System - Matte Black/Stainless ROCK TAMERS 3" Hub 1/24 ROCK TAMERS
 
 
3" Hub Mudflap System - Matte Black/Stainless   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 ROCK
TAMERS™ is the premiere “Adjustable and Removable” Mudflap System
designed to provide the ultimate protection for your towables from
damage caused by rocks and road debris. Perfect solution for
consumers who want the utility aspect of mudflaps and to maintain their
vehicle’s stylish and attractive appearance. *This patented system is easy to attach or remove from any standard 3" ball mount Features: 
    Mudflap height is adjustable to maintain consistent ground clearance when towing various loadsOverall width is adjustable and easily fine-tuned to fit any small, full size, or dually truckWidth expands from 68 1/4" to 97 3/4"Mudflap measures 24" x 24" In the Box: 
    3" Center Hub/Matte Black FinishM10 Ball Mount Clamp Bolt x 2M10 Jam Nut x 2M10 Split Washer and M10 Flat Washer x 2Hub Arm R (Right)  and Hub Arm L (Left) x 1M6 Arm Clamp Bolt x 6M6 Nylon Insert Hex Nut x 6M18 Arm Pivot Bolt/Split Washer/Flat Washer x 25MM Allen Wrench x 1Flap Support Rod x 2Rod End Cap and Flap End Cap x 2M5 Flap Retainer and End Cap Bolt x 2M5 Nylon Insert Hex Nut x 4Flap Clamp / Matte Black Finish x 2Mudflap (SS Trim Plate) x 2M8 Flap Clamp Bolt/Flat Washer/Hex Nut x 10Bolt Hole Punch x 1Rock Tamers Trim Plate x 2M6 Trim Plate Bolt/Spacer/Washer/Hex Nut x 16Locking STAR PIN™ Wrench x 1Instruction Manual  x 1 *Sold as a Kit   INSTALLATION INSTRUCTIONS  
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | Mudflap System - Matte Black/Stainless ROCK TAMERS 2" Hub  1/24 ROCK TAMERS
 
 
2" Hub Mudflap System - Matte Black/Stainless   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 ROCK
TAMERS™ is the premiere “Adjustable and Removable” Mudflap System
designed to provide the ultimate protection for your towables from
damage caused by rocks and road debris. Perfect solution for
consumers who want the utility aspect of mudflaps and to maintain their
vehicle’s stylish and attractive appearance. *This patented system is easy to attach or remove from any standard 2" ball mount Features: 
    Mudflap height is adjustable to maintain consistent ground clearance when towing various loadsOverall width is adjustable and easily fine-tuned to fit any small, full size, or dually truckWidth expands from 67 1/4" to 96 3/4"Mudflap measures 24" x 24" In the Box: 
    2" Center Hub/Matte Black FinishM10 Ball Mount Clamp Bolt x 2M10 Jam Nut x 2M10 Split Washer and M10 Flat Washer x 2Hub Arm R (Right)  and Hub Arm L (Left) x 1M6 Arm Clamp Bolt x 6M6 Nylon Insert Hex Nut x 6M18 Arm Pivot Bolt/Split Washer/Flat Washer x 25MM Allen Wrench x 1Flap Support Rod x 2Rod End Cap and Flap End Cap x 2M5 Flap Retainer and End Cap Bolt x 2M5 Nylon Insert Hex Nut x 4Flap Clamp / Matte Black Finish x 2Mudflap (SS Trim Plate) x 2M8 Flap Clamp Bolt/Flat Washer/Hex Nut x 10Bolt Hole Punch x 1Rock Tamers Trim Plate x 2M6 Trim Plate Bolt/Spacer/Washer/Hex Nut x 16Locking STAR PIN™ Wrench x 1Instruction Manual  x 1 *Sold as a Kit  
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
  
    | 7,500lb Disc Brake Actuator – Tie Down Engineering Model- LOAD-RITE 1/24 LOAD-RITE
 
 
   7,500lb Disc Brake Actuator – Tie Down Engineering Model   SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS 
 The
Model 750E works by the “surge” or “push” of the trailer toward the tow
vehicle. This automatically synchronizes the trailer brakes with the
tow vehicle axle brakes. When the trailer pushes against the tow
vehicle, the actuator telescopes together and applies the force to the
master cylinder, supplying hydraulic pressure to the brakes. The
built-in dampening shock absorber retards the telescoping shock against
the hitch ball. Be sure to comply with the regulations for brakes in the
state. Brake laws are sometimes minimum standards, and users may wish
to add additional brakes to a trailer. Read the tow vehicle
owner’s manual on towing capacity and other towing recommendations
before installing brakes or this actuator. The Model 750E Actuator is
completely assembled and ready to bolt into place if not all
ready-installed. Manufactured for tongue sizes: 3”x 3”, 3”x 4", and 3”x
5”. Features: 
    7,500 lbs. capacityFits 2? in. hitch ballFor use with disc brakes Maximum Actuator Capacity: 
    Gross Load: 7,500 lbs.Maximum Tongue Load: 750 lbs. The
actual in-service rating is limited to that of the ball and hitch or
the least-rated component on the tow vehicle or trailer being used, or
the trailer manufacturer’s G.V.W.R. shown on the certification label,
whichever is lower (note: G.V.W.R. is the Gross Vehicle Weight Rating,
which includes the trailer and the load weight as a total gross weight).   
 
 |  Click for larger image
 
 
  
 | 
  | 
 | 
    |  |