Track Mount    The mount fits tracks that accepts 3" wide x 1/4" thick track plates(Bert's, Traxtech, Titelok).  Therefore, you do not have to replace your existing track system unnecessarily. (Track not included with the mount;  may be purchased separately.)

Part Number: MTU42 CHOOSE FROM OPTIONS

The 42° Lund mount is machined from a solid piece of aluminum bar and is pressed to create the angled bend.  The slotted keys are made from stainless steel and are attached to all solid aluminum components which complete the round knobs.  You will know when your unit is locked into place when the red line gauge is in the vertical position.  Also, provided with this unit are two synthetic levelers at the end of the unit to give the mount added support and to protect the gunnel from unnecessary scratches.

 A single rod holder can be mounted to this unit, or for use with multiple rod holders, the cross-plate can either be mounted directly to the mount or with 2" stanchion risers!  Cannon, Big Jon and Walker downrigger adapter plates are also available.

Longer lengths of track can be secured to multiple Lund mounts to create a strong, versatile and easily removable track system.  Contact us with your measurements and we can get a setup designed just for you!

The dimensions of the top mounting surface of this bracket are 3" x 4".

  *Track or cross plates not included.

 Click on image to enlarge

 

The short cradle is designed for quick and easy removal of the fishing rod.  The rods reel will sit in the cut out recession against the base of the cradle and the rod handle will sit safely into the boat. 

This design works well for pulling boards as well as running your rod tips near the water for Muskie fishing.

There is a recession in where the reel sits in the cradle to help protect the rod and assist in keeping it from spinning in the cradle.  There is also a trigger slot at the far end of the cradle to ensure that rods with triggers on them sit comfortably in the cradle.

Many people find that staggering their rods at different heights works well to keep their lines and boards from crossing!  Check out our different length Riser Mounts to see which sizes may best suit your needs!

If you are looking to bury your rod tip into the water we do have "chicken ring's" available as shown in the photo's of our Long Cradle Rod Holder.  This option is great if you plan to bury your rod tips in the water or if you want to tilt your rod up vertically and lock them in place when cruising between destinations.

Product Features

The cradle style rod holders are designed to index 360° with 20 interlocking positions by simply lifting and turning our exclusively engineered spring loaded mechanism.  When engaged, it is secured by machined teeth around the entire circumference for virtually no wear on the product ensuring long lasting sustainability.

In addition to the radial movement, the cradle will adjust to any angle from 0-135° by actuating the padded lever.  The lever can be rotated in any direction to meet the needs of each user.  No tools are required for positioning of the rod holder.  All aluminum components are anodized to military specs.

The cradle rod holder is designed to ensure quick removal of  the rod from the holder.  The handle of the rod can be removed by tilting it up vertically and freeing it from the cradle.  

This product is great for pulling dipsy's and trolling with Muskie lures!

*Colors are available upon request

Part Number: XPLIT

CFS Sure-Lok Adjustable LED Light

(TRACK NOT INCLUDED)

Our new fully adjustable LED boat light offers high illumination with little power.  With no tools required you now have the option to quickly position light anywhere on your vessel to safely work, walk or net fish any time from dusk til dawn.  Simply lift and turn our 360° rotating indexing bases or release/lock the cam lever to operate the unit. 

This adjustable work light is available with or without a riser to optimize the platform and environment that fits best for your needs.  Any size riser 10"+ can have access holes added into the tubing (free of charge) upon request to help conceal wiring/connections as shown in the photos.

 

Lighting Specifications:

• 1.5 Amps @ 12V 
• 12-24 Volt Capable
• 1350 Lumens
• 6" Wire Leads 
• Rating I67, 20G

ALL lights come standard with a Track Mount but can also be used with any of our Mounts for Single Units (upon verbal request). 

Part Number: MTFHK or MTFHK-TM

This adjustable Fish Hawk Mount comes with indexing bases and has the hole patterns for the X2 and the X4 Fish Hawk Displays.  The hole patterns are drilled and threaded for a clean look and the spring loaded indexing bases allow for quick viewing adjustment.  

This mount is able to attach to any of our Mount for Single Rod Holders.  Our most popular Fish Hawk Mount with a Track Base included is an option below.  For all other mounting scenarios please select the best option to fit your needs. 

 SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

 

 

 

Part Number: XPCUP - CHOOSE MOUNTING TYPE (track mount shown for display)

This aluminum cup holder is large enough to securely hold any beverage can wrapped in a koozie and can be mounted to your boat in many ways.  Unlike other cup holders available we take the time to apply a thick rubber coating around the rim of every cup holder for a safe and clean look. 

Cup holders can slide into any Bert's, Traxstech or Cisco track system (similar models will fit as well) when mounted to our track mount as shown in the photo.  

For customers looking to install one on a Cross-Plate in between rod holders this can easily be done.  On the underside of any of our Double, Triple, or Quad Cross-Plates simply drill out the pre existing dimple and the hole pattern in the bottom of the cup holder will line up with these holes.  Mounting hardware provided.

Part Number: MTQRM  Choose Hole Pattern and Stanchion Size

The quick release mount was designed for charter captains but has been adopted by many fisherman who were looking to quickly remove and store rod holders from their boat with no loose pieces (such as thumbscrews) to misplace.  The unit can simply be secured to your boat in seconds.

 The bottom (or gunnel) plate will mount directly to the gunnel and the top plate will slide onto it. Our brass plunger secures it into place.  A machined aluminum stop (shown to the left) will ensure that the unit cannot go any further outboard than the gunnel plate.

This mount has become one of our top selling units due to its tight fitting design which incorporates the machined interlocking channels and our solid brass plunger.  There is no “slop” when the gunnel plate is secured to the quick release top plate.  All pieces of this mount have been machined down from a solid block of aluminum.

*Extra gunnel plates for additional mounting locations are available for purchase.

These thumbscrews are now provided standard with all new equipment purchased throughout our Cisco product line; they can also replace any thumbscrews previously used for your Cisco, Big Jon and Bert's equipment that utilize a standard 1/4-20 thread!

Part Number: PKQ

Choose  from all mounting options

This track mount is perfect for fishermen who like the versatility of being able to move their rod holder units to many different locations.  The track mount will slide into the track and lock it in position by tightening the two thumbscrews.

We recommend this with Cisco’s Sure-Stop Track as it was designed to slide into and through the track as smoothly as possible.   This unit is compatible with Bert's, Traxstech and most major track systems.

  Adjustability of the Rod Holders

The tube style rod holder is designed to index 360° with 20 interlocking positions by simply lifting and turning our exclusively engineered spring loaded mechanism. When engaged, it is secured by machined teeth around the entire circumference for virtually no wear on the product ensuring a lifetime of sustainab

ility.

 In addition to the radial movement, the tube will adjust to any angle from 0-90° by actuating the padded lever. Unlike some competitors who use a spring loaded screw to fit into a couple sets of pre determined holes, our system allows for infinite adjust-ability with superior strength, and a secured tight fit with no slop.  The lever can be rotated in any direction to meet the needs of each user.

 No tools are required for positioning of the rod holder and comes with a Lifetime Limited Warranty. All aluminum components are anodized to military specs.

Gimbal Mount    The Gimbal Mount ball and socket design will adjust up to 30 degrees in any direction. The distal end of the Gimbal pole has a unique locking system. The ball and socket design and the locking system are exclusive to Cisco Fishing Systems, Ltd.

positions by simply lifting and turning our exclusively engineered
spring loaded mechanism. The tube will adjust to any angle from 0-90°

by actuating the padded lever.

 

The Pro Trac Lund Mount is designed to fit the 90° angled track system
on Lund boats 2005 and newer. No tools are needed to attach/detach
equipment from the boat. Red indicator knobs provide a visual that the

mount is engaged properly.

Part Number: RISXX  CHOOSE RISER HEIGHT

For fishermen looking for a way to elevate and electronics mount or stagger single rod holders throughout the boat we have designed the strongest riser mount capable of withstanding high amounts of stress.  Most popular riser mounts use an extruded thin walled aluminum tubing to gain elevation and the top joint of the mount is cast plastic which will fatigue and break over time.  Our mount is made from 100% aircraft grade aluminum and machined from solid material to offer a virtually indestructible riser. 

Any pre-existing or new Cisco Tube or Cradle Style Rod Holders can be mounted to the top of this riser as well as our Sure-Lok Electronics Mount.  Standard sizes are available in 8", 14" and 18" increments; custom size and colored risers are available upon request. The riser can be mounted to any Cross-Plate or Mount for Single Rod Holders available for purchase. 

*Mount not included.

 PATRIOT CRADLE ROD HOLDER

CHOOSE RAIL CLAMP SIZE IN THE DROP DOWN OPTIONS BOX

 

The Patriot cradle is one of our most universal rod holders and is designed to accept a wide variety of different style fishing rods.  For anglers who fish for different species this holder will accept your trolling rods, line counters, bait casters. spinning rods, and fly rods.  There are many different locations to rest your reel, and the various slots allow for rods with triggers to be positioned without interference.  For anything from drifting, bottom bouncing to trolling this rod holder is a solid bet!

 Product Features

The cradle style rod holders are designed to index 360° with 20 interlocking positions by simply lifting and turning our exclusively engineered spring loaded mechanism.  When engaged, it is secured by machined teeth around the entire circumference for virtually no wear on the product ensuring long lasting sustainability.

In addition to the radial movement, the cradle will adjust to any angle from 0-135° by actuating the padded lever.  The lever can be rotated in any direction to meet the needs of each user.  No tools are required for positioning of the rod holder.  All aluminum components are anodized to military specs.

The cradle rod holder is designed to ensure quick removal of  the rod from the holder.  The handle of the rod can be removed by tilting it up vertically and freeing it from the cradle.

Part Number: PKLTR

The long cradle was originally designed for charter boats but has been adopted by many fishermen with a smaller size deck.  The unit was engineered to allow the reel to be held further up the cradle keeping more of the rod handle out of the boat.  There is a security ring at the end of the cradle which can be quickly engaged/disengaged.

Charter captains use of the long cradle allows for comfort and freedom for their customers to move around the deck. 

This product is great for pulling dipsy's and trolling with Muskie lures!

Product Features

The cradle style rod holders are designed to index 360° with 20 interlocking positions by simply lifting and turning our exclusively engineered spring loaded mechanism.  When engaged, it is secured by machined teeth around the entire circumference for virtually no wear on the product ensuring long lasting sustainability.

In addition to the radial movement, the cradle will adjust to any angle from 0-135° by actuating the padded lever.  The lever can be rotated in any direction to meet the needs of each user.  No tools are required for positioning of the rod holder.  All aluminum components are anodized to military specs.

The cradle rod holder is designed to ensure quick removal of  the rod from the holder.  The handle of the rod can be removed by tilting it up vertically and freeing it from the cradle.  

Track  Mount Features

This mount is designed for inside track dimensions of 3” wide and ¼” thick (Cisco, Bert’s, Traxstech, Cannon and Tite-lok).  The plate will slide into the track and will lock in place with two thumbscrews.  

For the finest quality track at the least expensive price compared to our competitors check out our Sure-Stop Track and see why every one is making the switch to our premier track system

Part Number: PKSRM

Thumbscrew Rail Mount Features

 

Note: Price for custom rail size, if available will be conveyed to the customer once the rail size information is received.

 

Please measure the outside diameter of your rail, most common are 7/8", some are 1.0"

Our newly designed 7/8” or 1" thumbscrew rail mount gives the user additional options than the rail mount described above.  As shown to the right, the rod holder is attached to a top plate with two thumbscrews and can be attached/unattached leaving only the slim fitted mount attached to the rail.  

 Users found this mount most practical when frequently removing the rod holders from their boat for storage or to re-attach the slim fitted boat cover.

If you are more of a casual fisherman and prefer to have multiple placements around your boat you may also purchase additional base mounts.  This option allows you to move your rod holders from base to base rather than purchasing additional rod holders than necessary.

  Adjusting the Rod Holders

The tube style rod holder is designed to index 360° with 20 interlocking positions by simply lifting and turning our exclusively engineered spring loaded mechanism. When engaged, it is secured by machined teeth around the entire circumference for virtually no wear on the product ensuring a lifetime of sustainability.

 In addition to the radial movement, the tube will adjust to any angle from 0-90° by actuating the padded lever. Unlike some competitors who use a spring loaded screw to fit into a couple sets of pre determined holes, our system allows for infinite adjust-ability with superior strength, and a secured tight fit with no slop.  The lever can be rotated in any direction to meet the needs of each user.

 No tools are required for positioning of the rod holder and comes with a Lifetime Limited Warranty. All aluminum components are anodized to military specs.

Part Number: PKSTM

CHOOSE MOUNT TYPE

This rod holder is perfect for fishermen who like the versatility of being able to move their rod holder units to many different locations.  The track mount will slide into the track and lock it in position by tightening the two thumbscrews.  Choose the mount type best for your fishing experience

We recommend this with Cisco’s Sure-Stop Track as it was designed to slide into and through the track as smoothly as possible.   This unit is compatible with Bert's, Traxstech and Tite-lok track systems.

  Adjustability of the Rod Holders

The tube style rod holder is designed to index 360° with 20 interlocking positions by simply lifting and turning our exclusively engineered spring loaded mechanism. When engaged, it is secured by machined teeth around the entire circumference for virtually no wear on the product ensuring a lifetime of sustainability.

 In addition to the radial movement, the tube will adjust to any angle from 0-90° by actuating the padded lever. Unlike some competitors who use a spring loaded screw to fit into a couple sets of pre determined holes, our system allows for infinite adjust-ability with superior strength, and a secured tight fit with no slop.  The lever can be rotated in any direction to meet the needs of each user.

 No tools are required for positioning of the rod holder and comes with a Lifetime Limited Warranty. All aluminum components are anodized to military specs.

Rod Holder Color Options

Rod Holder Features

The tube style rod holder is designed to index 360° with 20 interlocking positions by simply lifting and turning our exclusively engineered spring loaded mechanism.  When engaged, it is secured by machined teeth around the entire circumference for virtually no wear on the product ensuring long lasting sustainability.

 In addition to the radial movement, the tube will adjust to any angle from 0-90° by actuating the padded lever.  The lever can be rotated in any direction so it locks in the downward position.  In the bottom of each tube  a machined extension  mates with the cross cut in the rod handle butt to keep the rod from swaying.

 No tools are required for positioning of the rod holder.   All aluminum components are anodized to military specs.

 

 

Part Number: MTTSS

This thumbscrew mount is for use with a single rod holder and comes with two separate plates.  The rod holder will mount to the top plate and the bottom plate will mount directly to the gunnel.  The two plates are secured together by two thumbscrews and can be easily disassembled for removal/storage from the gunnel.

The dimensions of the base are 3" x 4" and is machined from solid aluminum and clear anodized finish. Thumbscrews secure into  1/4-20 threaded holes.

 

 

Part Number: PKLRM Select 7/8" or 1.0" Rail Size (Prices for custom rail sizes if available will be conveyed to the customer once we know the size and availablility)

The long cradle was originally designed for charter boats but has been adopted by many fishermen with a smaller size deck.  The unit was engineered to allow the reel to be held further up the cradle keeping more of the rod handle out of the boat.  There is a security ring at the end of the cradle which can be quickly engaged/disengaged.

Charter captains use of the long cradle allows for comfort and freedom for their customers to move around the deck. 

This product is great for pulling dipsy's and trolling with Muskie lures!

Product Features

The cradle style rod holders are designed to index 360° with 20 interlocking positions by simply lifting and turning our exclusively engineered spring loaded mechanism.  When engaged, it is secured by machined teeth around the entire circumference for virtually no wear on the product ensuring long lasting sustainability.

In addition to the radial movement, the cradle will adjust to any angle from 0-135° by actuating the padded lever.  The lever can be rotated in any direction to meet the needs of each user.  No tools are required for positioning of the rod holder.  All aluminum components are anodized to military specs.

The cradle rod holder is designed to ensure quick removal of  the rod from the holder.  The handle of the rod can be removed by tilting it up vertically and freeing it from the cradle.  

Thumbscrew Rail Mount Features

Our newly designed thumbscrew rail mount gives the user additional options than the rail mount described above.  As shown to the right, the rod holder is attached to a top plate with two thumbscrews and can be attached/unattached leaving only the slim fitted mount attached to the rail.  

 Users found this mount most practical when frequently removing the rod holders from their boat for storage or to re-attach the slim fitted boat cover.

 If you are more of a casual fisherman and prefer to have multiple placements around your boat you may also purchase additional base mounts.  This option allows you to move your rod holders from base to base rather than purchasing additional rod holders than necessary.

Part Number: XPCAN  - Choose plate adapter from options in drop down menu.

This mounting plate will serve as an adapter for any Cannon downrigger equipped with a stationary or swivel base.  The adapter plate is capable of mounting to any of our Mounts for Multi Units, however, this plate is most popular being mounted either our Lund Mounts or our Tracker VersaTrack Mount.

 

*If you intend on mounting this to our 42° Sport Trac Lund Mount please select this option below.  All other mounts will work with our Standard Cannon Adapter Plate.

High Capacity 8" Aluminum Reel - This over sized reel is similar to our 6" reel. Its frame is machined from a solid piece of aircraft grade aluminum and comes with four clutch pads made from 660 bronze. The inner hub measures 3½" in diameter and it uses a 7/16" diameter bore. Revolving handle may also be attached to this unit.

This bracket is designed to help disperse the torque more evenly across the surface of the gunnel.  By having the mount elongated to cover a larger footprint across the gunnel it creates a much more rigid surface for mounting your downriggers and elimates the possibility of flexing on the Pro Trac.  

Cannon, Big Jon and Walker, Scotty  and Cisco downrigger adpater plates are also available (as shown in the photo but sold separately).

Part Number: XPRHS

These black protective sleeves are a perfect way to protect your rod holders when they are not in use.  This expandable sleeve will fit snugly over the entire rod holder and will protect the tube from scratches.

 

The sleeve simply slides onto the rod holder to allow for easy covering and removal.  The top of the netting also folds inside the top of the tube to protect the rim of the tube from damage.

Cisco Rod Rack/Rocket Launcher Backing Plates

 

These track backing plates are designed to reinforce each of the mounting stress points where the rod racks connect to to your hard top or gunnel.  We recommend these since they reinforce the underneath mounting hole locations whenever possible.  These plates are made from solid aircraft grade aluminum.