|
|
Thumbscrew, Standard 1/24
MUDDYCREEK
1/2? Hex Bolt Head with 1/4-20 threads by 3/4 Long knurled head
|
Click for larger image
|
|
Lanyard Ring 1/24
MUDDYCREEK
LANYARD RING
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
- SLIDES OVER ROD HOLDER TUBE THREADS
- ROD HOLDER NOT INCLUDED
|
no picture
|
|
Riser – Rod Holder 1/24
MUDDYCREEK
Rod Holder Risers
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
RISERS ARE MOUNTED DIRECTLY TO THE TRACK PLATE
5" Riser 7 × 2 × 2 in
10" Riser 12 × 2 × 2 in
15" Riser 17 × 2 × 2 in
20" Riser 22 × 2 × 2 in
|
Click for larger image
|
|
Assy – Pulley Only 1/24
MUDDYCREEK
PULLEY ONLY ASSEMBLY
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
|
Click for larger image
|
|
Pulley 18 inch Riser Choose Standard (Deck) or Track Mount & quantity 1/24
MUDDYCREEK
Pulley 18inch Riser Choose Standard (Deck) or Track Mount & Quantity
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
3 inch X 4?inchBase Plate and Mounting Plate
Commonly used on the roof of a boat near the bow to gain extra height for med. and large planer board line
|
Click for larger image
|
|
CUP HOLDER - TRACK MOUNT 1/24
MUDDYCREEK
CUP HOLDER - TRACK MOUNT
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
|
Click for larger image
|
|
Forward Pulley Choose Clamps Size & Quantity 1/24
MUDDYCREEK
Forward Pulley Clamp Choose Clamp Size and Quantity
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
SMALL
.875 Inches to 1-1/8 Inches Dia.
MEDIUM
1 3/16 Inches To 2 Inches Dia.
LARGE
Large Clamp 2 Inches To 3 Inches Dia.
|
Click for larger image
|
|
Electronics Mount – Choose Standard (deck) or Track Mount & Quantity 1/24
MUDDYCREEK
Electronics Mount – Choose Standard (deck) or Track Mount & Quantity
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
|
Click for larger image
|
|
Net Holder - Choose Mount Type & Quantity 1/24
MUDDYCREEEK
Net Holder - Choose Mount Type & Quantity Choose from Deck, Track or Drop & Lock Mount
OUR TRACK ROD HOLDERS ARE COMPATIBLE WITH CISCO ©, TRAXTECH© & CANNON© TRACKS
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
|
Click for larger image
|
|
Downrigger Gimbal Mount - Choose Quantity 1/24
MUDDYCREEK
DOWNRIGGER GIMBAL MOUNT
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
- 5"x 5" Top Plate for Downrigger
- Rotatable Gimbal located under 5 inch x 5inch Mounting Plate
|
Click for larger image
|
|
Track Assembly Systems - Choose Length & Quantity 1/24
MUDDYCREEK
Track Assembly Systems - Choose Length & Quantity
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
EACH TRACK SECTION COMES WITH 4 SET SCREW STOPS
- EACH TRACK SECTION COMES WITH 1/4-20 FLAT SOCKET HEAD BOLTS, WASHERS, LOCKWASHERS, AND HEX NUTS
- QUICK RELEASE PINS ARE SEPARATELY FOR $7.00 EACH
BACKING PLATES SOLD SEPARATELY
|
Click for larger image
|
|
TRACK BACKING PLATES - CHOOSE QUANTITY 1/24
MUDDYCREEK
TRACK BACKING PLATE (CHOOSE QUANTITY
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Plate is 3 inches Long x 1 1/2 inches Wide x 1/4 inch Thick
|
Click for larger image
|
|
QUICK PIN FOR TRACKS 1/24
MUDDYCREEK
QUICK PIN FOR TRACK SYSTEMS
SOLD ONLY WITH TRACK PURCHASES
FOR EXTRA SECURITY THESE PINS CAN BE QUICKLY INSERTED AT THE END OF THE TRACK TO PROTECT FROM ROD HOLDERS GETTING OUT OF THE TRACK SYSTEM
|
Click for larger image
|
|
Gimbal 18 or 24 inch Track System - Choose Angle, & Quantity 1/24
MUDDYCREEK
Gimbal Track System Choose Angle, & Quantity
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
|
Click for larger image
|
|
Downrigger Mount – Choose Deck or Track Mount & Quantity– 5 inch Height 1/24
MUDDYCREEK
Downrigger Mount – Choose Deck or Track Mount & Quantity– 5 inch Height
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
|
Click for larger image
|
|
GIMBAL BAR 1/24
MUDDYCREEK
GIMBAL BAR
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
For gimbal butt rods, the gimbal bar can be inserted into the bottom of the rod holder. The bar indexes into the gimbal slots on the handle and prevents the rod from rotating.
- ONE ALUMINUM BAR
- TWO 1/8 STANLESS STEEL PINS
- PRESS PINS AND BAR IN TOP OF STANDARD TUBE ROD HOLDER
|
Click for larger image
|
|
CRADLE ROD HOLDER EXTENSIONS
1/24
MUDDYCREEK
CRADLE ROD HOLDER EXTENSIONS
(std is 4 inches add up to 12 inches total with options on right)
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
- The Cradle Extension moves and offsets the rod and reel out side if the boat
- The Cradle Extension is easily bolted on our adjustable cradle rod holder
- By removing the existing cradle to the offset end and bolting the bottom to the knuckle rod holder top
- When attaching the extension
- the cradle should be mounted toward the bow, and the adjustable knuckle should be toward the stern
|
Click for larger image
|
|
Tool Caddy 1/24
MUDDYCREEK
MUDDYCREEK TOOL CADDY
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
The Muddycreek Tackle Tool Caddy is constructed of Aircraft Grade
Aluminum, Marine Grade Composite, and Stainless Hardware. Slots for an
assortment of tools are included in the UV and scratch resistant
composite top plate. Two knife slots conveniently and safely stow the
blades within the hollow heavy duty aluminum tube riser. A cup holder
tops off the assembly. This accessory is a must have for every track
equipped boat!
|
no picture
|
|
TOOL CADDY - TRACK 1/24
MUDDYCREEK
MUDDYCREEK TOOL CADDY
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
The Muddycreek Tackle Tool Caddy is constructed of Aircraft Grade
Aluminum, Marine Grade Composite, and Stainless Hardware. Slots for an
assortment of tools are included in the UV and scratch resistant
composite top plate. Two knife slots conveniently and safely stow the
blades within the hollow heavy duty aluminum tube riser. A cup holder
tops off the assembly. This accessory is a must have for every track
equipped boat!
|
Click for larger image
|
|
|
|
;)
;)
;)
;)
;)
;)
;)
;)
;)
;){kind=small}
;)
;)
;)
;)
;)
;)
;)
