Home


Items: 0
Total: $0.00
Shopcart Checkout
 

Home > Store > muddcreek_tackle > quad_rod_holders

Quad Horizontal Tree Standard Mount Assembly 1/24
MUDDYCREEK

Quad Horizontal Tree Standard Mount Assembly

 
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
 
 
MUDDYCREEK Tubes are REMOVABLE – Unlike the other manufacturers who use thin wall material, saw cut, crimp their tubes permanently on and add a rubber cap which usually falls off. All of our tubes are heavier tubing and have a fully machined radius on the end eliminating the need for a rubber cap, also having a standard right hand thread onto the rod holder so they can easily be removed whenever necessary.
 
MUDDYCREEK’S unique system incorporates an O-Ring into the area where the tube threads on, which compresses and absorbs vibration keeping the tube from coming loose. This system is great for storage purposes, and for rocket launchers now able to remove tubes in a few minute, giving you the clearance under the garage door.

Our High quality rod holders are manufactured in USA.

  • Made of air craft quality bright finish anodized aluminum.
  • Internal hardware is stainless steel.
  • Pivot joint has a boss which fits into a bore on the mating part so the aluminum housing takes the load.
  • Both rotational and tilt joints are spring loaded for ease of single hand operation.
  • Locks in at every 18 degrees and uses dual pin drive..
 


Price: $550.00 - $578.00

Click for larger image




Quad Horizontal Tree Track Mount Assembly 1/24
MUDDYCREEK

Quad Horizontal Tree Track Mount Assembly
 
OUR TRACK ROD HOLDERS ARE COMPATIBLE WITH CISCO ©, TRAXTECH© & CANNON©  TRACKS
 
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
 
MUDDYCREEK Tubes are REMOVABLE – Unlike the other manufacturers who use thin wall material, saw cut, crimp their tubes permanently on and add a rubber cap which usually falls off. All of our tubes are heavier tubing and have a fully machined radius on the end eliminating the need for a rubber cap, also having a standard right hand thread onto the rod holder so they can easily be removed whenever necessary.
 
MUDDYCREEK’S unique system incorporates an O-Ring into the area where the tube threads on, which compresses and absorbs vibration keeping the tube from coming loose. This system is great for storage purposes, and for rocket launchers now able to remove tubes in a few minute, giving you the clearance under the garage door.

Our High quality rod holders are manufactured in USA.

  • Made of air craft quality bright finish anodized aluminum.
  • Internal hardware is stainless steel.
  • Pivot joint has a boss which fits into a bore on the mating part so the aluminum housing takes the load.
  • Both rotational and tilt joints are spring loaded for ease of single hand operation.
  • Locks in at every 18 degrees and uses dual pin drive..


Price: $550.00 - $578.00

hot offer
Click for larger image




Quad Horizontal Tree Skinny Gunwale Mount Assembly 1/24
MUDDYCREEK
Quad Horizontal Tree Skinny Gunwale Mount Assembly
 
 SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
MUDDYCREEK Tubes are REMOVABLE – Unlike the other manufacturers who use thin wall material, saw cut, crimp their tubes permanently on and add a rubber cap which usually falls off. All of our tubes are heavier tubing and have a fully machined radius on the end eliminating the need for a rubber cap, also having a standard right hand thread onto the rod holder so they can easily be removed whenever necessary.
 
MUDDYCREEK’S unique system incorporates an O-Ring into the area where the tube threads on, which compresses and absorbs vibration keeping the tube from coming loose. This system is great for storage purposes, and for rocket launchers now able to remove tubes in a few minute, giving you the clearance under the garage door.

Our High quality rod holders are manufactured in USA.

  • Made of air craft quality bright finish anodized aluminum.
  • Internal hardware is stainless steel.
  • Pivot joint has a boss which fits into a bore on the mating part so the aluminum housing takes the load.
  • Both rotational and tilt joints are spring loaded for ease of single hand operation.
  • Locks in at every 18 degrees and uses dual pin drive..
 


Price: $550.00 - $578.00


Click for larger image




Quad Horizontal Tree Low Profile Mount Assembly 1/24
MUDDYCREEK
Quad Horizontal Tree Low Profile Mount Assembly
 
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATI0NS
 
 
MUDDYCREEK Tubes are REMOVABLE – Unlike the other manufacturers who use thin wall material, saw cut, crimp their tubes permanently on and add a rubber cap which usually falls off. All of our tubes are heavier tubing and have a fully machined radius on the end eliminating the need for a rubber cap, also having a standard right hand thread onto the rod holder so they can easily be removed whenever necessary.
 
MUDDYCREEK’S unique system incorporates an O-Ring into the area where the tube threads on, which compresses and absorbs vibration keeping the tube from coming loose. This system is great for storage purposes, and for rocket launchers now able to remove tubes in a few minute, giving you the clearance under the garage door.

Our High quality rod holders are manufactured in USA.

  • Made of air craft quality bright finish anodized aluminum.
  • Internal hardware is stainless steel.
  • Pivot joint has a boss which fits into a bore on the mating part so the aluminum housing takes the load.
  • Both rotational and tilt joints are spring loaded for ease of single hand operation.
  • Locks in at every 18 degrees and uses dual pin drive..
 


Price: $550.00 - $578.00


Click for larger image




Four Rod Holder Rail Mount (clamshell) Assembly 1/24
MUDDYCREEK
Quad Horizontal Tree Clamshell Mount Assembly
 
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

 

MUDDYCREEK Tubes are REMOVABLE – Unlike the other manufacturers who use thin wall material, saw cut, crimp their tubes permanently on and add a rubber cap which usually falls off. All of our tubes are heavier tubing and have a fully machined radius on the end eliminating the need for a rubber cap, also having a standard right hand thread onto the rod holder so they can easily be removed whenever necessary.

MUDDYCREEK’S unique system incorporates an O-Ring into the area where the tube threads on, which compresses and absorbs vibration keeping the tube from coming loose. This system is great for storage purposes, and for rocket launchers now able to remove tubes in a few minute, giving you the clearance under the garage door.

Our High quality rod holders are manufactured in USA.

  • Made of air craft quality bright finish anodized aluminum.
  • Internal hardware is stainless steel.
  • Pivot joint has a boss which fits into a bore on the mating part so the aluminum housing takes the load.
  • Both rotational and tilt joints are spring loaded for ease of single hand operation.
  • Locks in at every 18 degrees and uses dual pin drive..


Price: $640.00 - $668.00


Click for larger image




Four Rod Articulating Track Mount Assembly 1/24
MUDDYCREEK
Four Rod Articulating Tree Track Mount Assembly
 
OUR TRACK ROD HOLDERS ARE COMPATIBLE WITH CISCO ©, TRAXTECH© & CANNON©  TRACKS
 
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
 
ARTICULATING ROD HOLDERS ADD ANOTHER DIMENSION TO THE TIP HEIGHT SEPARATION BETWEEN ROD HOLDERS
 
MUDDYCREEK Tubes are REMOVABLE – Unlike the other manufacturers who use thin wall material, saw cut, crimp their tubes permanently on and add a rubber cap which usually falls off. All of our tubes are heavier tubing and have a fully machined radius on the end eliminating the need for a rubber cap, also having a standard right hand thread onto the rod holder so they can easily be removed whenever necessary.
 
MUDDYCREEK’S unique system incorporates an O-Ring into the area where the tube threads on, which compresses and absorbs vibration keeping the tube from coming loose. This system is great for storage purposes, and for rocket launchers now able to remove tubes in a few minute, giving you the clearance under the garage door.

Our High quality rod holders are manufactured in USA.

  • Made of air craft quality bright finish anodized aluminum.
  • Internal hardware is stainless steel.
  • Pivot joint has a boss which fits into a bore on the mating part so the aluminum housing takes the load.
  • Both rotational and tilt joints are spring loaded for ease of single hand operation.
  • Locks in at every 18 degrees and uses dual pin drive..


Price: $705.00 - $733.00


Click for larger image




Quad Articulating Tree Standard Mount Assembly 1/24
MUDDYCREEK

Quad Articulating Tree Standard Mount Assembly

 
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
 
 
MUDDYCREEK Tubes are REMOVABLE – Unlike the other manufacturers who use thin wall material, saw cut, crimp their tubes permanently on and add a rubber cap which usually falls off. All of our tubes are heavier tubing and have a fully machined radius on the end eliminating the need for a rubber cap, also having a standard right hand thread onto the rod holder so they can easily be removed whenever necessary.
 
MUDDYCREEK’S unique system incorporates an O-Ring into the area where the tube threads on, which compresses and absorbs vibration keeping the tube from coming loose. This system is great for storage purposes, and for rocket launchers now able to remove tubes in a few minute, giving you the clearance under the garage door.

Our High quality rod holders are manufactured in USA.

  • Made of air craft quality bright finish anodized aluminum.
  • Internal hardware is stainless steel.
  • Pivot joint has a boss which fits into a bore on the mating part so the aluminum housing takes the load.
  • Both rotational and tilt joints are spring loaded for ease of single hand operation.
  • Locks in at every 18 degrees and uses dual pin drive..


Price: $705.00 - $733.00


Click for larger image




Quad Horizontal Tree Standard Gimbal Mount Assembly 1/24
MUDDYCREEK

 
 Quad Horizontal Tree Standard Gimbal Mount Assembly
 
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
 
 
MUDDYCREEK Tubes are REMOVABLE – Unlike the other manufacturers who use thin wall material, saw cut, crimp their tubes permanently on and add a rubber cap which usually falls off. All of our tubes are heavier tubing and have a fully machined radius on the end eliminating the need for a rubber cap, also having a standard right hand thread onto the rod holder so they can easily be removed whenever necessary.
 
MUDDYCREEK’S unique system incorporates an O-Ring into the area where the tube threads on, which compresses and absorbs vibration keeping the tube from coming loose. This system is great for storage purposes, and for rocket launchers now able to remove tubes in a few minute, giving you the clearance under the garage door.

Our High quality rod holders are manufactured in USA.

  • Made of air craft quality bright finish anodized aluminum.
  • Internal hardware is stainless steel.
  • Pivot joint has a boss which fits into a bore on the mating part so the aluminum housing takes the load.
  • Both rotational and tilt joints are spring loaded for ease of single hand operation.
  • Locks in at every 18 degrees and uses dual pin drive..
 


Price: $834.00 - $862.00

Click for larger image




Quad Horizontal Articulating Tree Standard Gimbal Mount Assembly 1/24
Quad Horizontal Articulating Tree Standard Gimbal Mount Assembly
 
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
 
MUDDYCREEK Tubes are REMOVABLE – Unlike the other manufacturers who use thin wall material, saw cut, crimp their tubes permanently on and add a rubber cap which usually falls off. All of our tubes are heavier tubing and have a fully machined radius on the end eliminating the need for a rubber cap, also having a standard right hand thread onto the rod holder so they can easily be removed whenever necessary.
 
MUDDYCREEK’S unique system incorporates an O-Ring into the area where the tube threads on, which compresses and absorbs vibration keeping the tube from coming loose. This system is great for storage purposes, and for rocket launchers now able to remove tubes in a few minute, giving you the clearance under the garage door.

Our High quality rod holders are manufactured in USA.

  • Made of air craft quality bright finish anodized aluminum.
  • Internal hardware is stainless steel.
  • Pivot joint has a boss which fits into a bore on the mating part so the aluminum housing takes the load.
  • Both rotational and tilt joints are spring loaded for ease of single hand operation.
  • Locks in at every 18 degrees and uses dual pin drive..
 


Price: $834.00 - $862.00

Click for larger image





Categories:

0_(zero)_degree
15_degree
30_degree
cisco_fishing_systems
coolers_tuna_tubes
crabbing
downriggers
fishing_reels
fishing_ski_radar_arches
foul weather gear
gemlux_products
glp_fishing_systems
horizontal_clamp-on
life_rafts
marine_antennas_hdwe
marine_battery_chargers
marine_compass
marine_electronics
marine_radios
marine_radios_handheld
marine_solar_charging_systems
mate_series_rod_cup_holder
mini_drifter_boats
mooring_whips
muddcreek_tackle
night vision,radar
rod_holder_inserts_liners
rod_rigger
shallow water anchors
shore_power_systems
swimplatforms_and__ladders
t-tops
tackle_and_storage_centers
trailer_accessories
trolling
two_way_clamp_on
underwater_lighting
vertical_clamp_0n
wakeboards
windshied_wiper
flush_mount_rod_holders
clamp_on_rod_holders
bulkhead_rod_holders
adjustable_rod_holders_and_track_systems
rocket_launchers
outriggers
marine_hardware_and_accessories_&_bow_thrusters

Rodholderdepot.com
7900 Anchor Bay Drive
(established 2010)
Clay Township, MI  48001
UNITED STATES
Phone: 1-586-255-0212


Please leave a phone number and a brief description of any question or concern.
© Copyright 2024 - Rodholderdepot.com
Privacy Policy