Part Number: XPLIT

CFS Sure-Lok Adjustable LED Light

(TRACK NOT INCLUDED)

Our new fully adjustable LED boat light offers high illumination with little power.  With no tools required you now have the option to quickly position light anywhere on your vessel to safely work, walk or net fish any time from dusk til dawn.  Simply lift and turn our 360° rotating indexing bases or release/lock the cam lever to operate the unit. 

This adjustable work light is available with or without a riser to optimize the platform and environment that fits best for your needs.  Any size riser 10"+ can have access holes added into the tubing (free of charge) upon request to help conceal wiring/connections as shown in the photos.

 

Lighting Specifications:

• 1.5 Amps @ 12V 
• 12-24 Volt Capable
• 1350 Lumens
• 6" Wire Leads 
• Rating I67, 20G

ALL lights come standard with a Track Mount but can also be used with any of our Mounts for Single Units (upon verbal request). 

Part Number: MTFHK

This adjustable Fish Hawk Mount comes with indexing bases and has the hole patterns for the X2 and the X4 Fish Hawk Displays.  The hole patterns are drilled and threaded for a clean look and the spring loaded indexing bases allow for quick viewing adjustment.  

This mount is able to attach to any of our Mount for Single Rod Holders.  Our most popular Fish Hawk Mount with a Track Base included is an option below.  For all other mounting scenarios please select the best option to fit your needs. 

 SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

 

 

 

Part Number: XPCUP - CHOOSE MOUNTING TYPE (track mount shown for display)

This aluminum cup holder is large enough to securely hold any beverage can wrapped in a koozie and can be mounted to your boat in many ways.  Unlike other cup holders available we take the time to apply a thick rubber coating around the rim of every cup holder for a safe and clean look. 

Cup holders can slide into any Bert's, Traxstech or Cisco track system (similar models will fit as well) when mounted to our track mount as shown in the photo.  

For customers looking to install one on a Cross-Plate in between rod holders this can easily be done.  On the underside of any of our Double, Triple, or Quad Cross-Plates simply drill out the pre existing dimple and the hole pattern in the bottom of the cup holder will line up with these holes.  Mounting hardware provided.

These thumbscrews are now provided standard with all new equipment purchased throughout our Cisco product line; they can also replace any thumbscrews previously used for your Cisco, Big Jon and Bert's equipment that utilize a standard 1/4-20 thread!

Part Number: MTDNL

Our Drop & Lock track mount is designed to fit into any track for track dimensions with an inside width of 3" and 1/4" height.  Unlike other track mounts which require entry points only on the sides of the tracks, this mount allows you to drop in from the top portion of the track, and rotate into a locking position.  For tracks that may have obstacles on either side of the tracks (cleats, bimini receptacles, fuel caps), this allows you to secure equipment without having to worry about interference.  

This mount will attach to any of our individual tube or cradle style rod holders, as well as our LED Light.  This mount is not designed for use with vertical trees, downriggers, or double/triple/quad units. 

Once in position inside the track you will lock in place with the two thumbscrews. 

Thumbscrew Mount   - Its great to have a spare Thumbscrew Mount for locating electronics in different places on your vessel. The base plate of this mount is permanently fastened to the guwale. A set of two thumbscrews fasten the mount to the base plate. This allows for easy removal and storage of your electronics.

There is a plate that attaches to the rod holder (not shown in photo) which allows the rod holder to be removed from the rail clamp. The plate is the exact same size as the clamp so there is no overhang and it is a clean look.  The plate attaches to the rail clamp with countersunk screws for a clean look. 

Available in 1-5/8", 1-7/8", 2" and 2-3/8".

 

 

Part Number: XPHLM

Cisco handline reels mounts are the most versatile and user friendly mounts available.  The length of the mounting plate is 15" long and has the ability to mount any A & S or Riveria handline reel to it using any of the pre drilled holes between 12.5" to 14.75" on the plate.  The unit can also easily pick up and rotate to any 360° location to help get the reel closer or further from the boats gunnel depending on the current.  This feature also makes it very convenient when docking the boat because you can align your reel parallel with your boats gunnel. 

The handline mount can secure to any of our Mounts for Single Rod Holders as well as our various, Lund mounts, Tracker mounts. Rail mounts, etc (purchased separately).   If you need any assistance figuring out the best way to rig your boat please contact us and we will gladly assist you!

Part Number: MTQRM

The quick release mount was designed for charter captains but has been adopted by many fisherman who were looking to quickly remove and store rod holders from their boat with no loose pieces (such as thumbscrews) to misplace.  The unit can simply be secured to your boat in seconds.

 The bottom (or gunnel) plate will mount directly to the gunnel and the top plate will slide onto it. Our brass plunger secures it into place.  A machined aluminum stop (shown to the left) will ensure that the unit cannot go any further outboard than the gunnel plate.

This mount has become one of our top selling units due to its tight fitting design which incorporates the machined interlocking channels and our solid brass plunger.  There is no “slop” when the gunnel plate is secured to the quick release top plate.  All pieces of this mount have been machined down from a solid block of aluminum.

*Extra gunnel plates for additional mounting locations are available for purchase.

Part Number: GPSTM

This GoPro®  track mount is designed to hold any standard GoPro cameras at the top of the 36" handheld mast.  The mast pole is fitted with a soft grip foam handle and fits securely into a base collar on a track mount (other mounts also available) for easy storage when not filming.  The mast pole is 5/8" diameter solid anodized aluminum and is the perfect length for reaching those awesome shots underwater while reeling in and netting fish!